Honeywell TRUESTEAM 69-2286EFS-03 - Manual (Page 10)

Y
our
new
true
steam
M27981
M29671
Your TrueSTEAM installation includes the following parts and components that you should be familiar with:
Cold water Connection with shutoff Valve a.
Provides the connection from TrueSTEAM to your
home’s cold water pipe. Your Professional Installer
may have used the saddle valve that came with
TrueSTEAM, or may have chosen a different type
of connection. This connection must include
a shutoff valve for you to turn off water flow to
TrueSTEAM, if necessary.
IMPORTANT: TrueSTEAM requires cold water.
Do not connect a hot water supply to TrueSTEAM.
water supply line B.
This 1/4-inch line brings cold water to TrueSTEAM
from a water pipe in your home. Your Professional
Installer may have used the plastic line provided or
a copper pipe, as appropriate.
in-line water Filter C.
It is likely the installer provided a water filter on
the water supply line leading to TrueSTEAM.
This helps minimize mineral deposits forming
in TrueSTEAM’s tank. For optimal performance,
replace this water filter once each humidification
season. See “How do I change the water filter?”
on page 19.
shutoff Valve and Backflow preventer D.
This valve was provided by Honeywell and is
required by code. It prevents water from flowing
backward in the water supply line.
M29679
a
B
C
D
e
F
K
l
J
H
i
g
m
n
What TrueSTEAM parts do I need to know?
TrueSTEAM Humidification System 69-2286EFS—03 8