Honeywell Switches and Sensors - Manual (Page 10)

8
www.honeywell.com/sensing
GLOBAL LIMIT SWITCHES
EVN2000 Series
EN 50047
Global Limit
Switches The EVN2000 series limit switch is an innovative product which has been developed to address a need
highlighted by Original Equipment Manufacturers (OEM), where “Ease of Wiring” is required. With the
new design there is no need for access to the inside of the housing and therefore the housing cover,
cover screws and gasket become obsolete. Furthermore, the integrated cable gland eliminates the need
for additional conduit or cable gland hardware. All Normally Closed (NC) contacts are Direct Opening.
Mechanical life: 10 million
Sealing: IP 66/67, NEMA 1, 12, 13
Operating temperature: -25 °C to 85 °C (-13 °F to 185 °F)
Approvals: IEC/EN 60947-5-1
EN 60529
EN81-1
AC15 A300
DC13 Q300
UL, CE
Housing material: Plastic
Termination: Insulation Displacement Terminals (IDT)
Switching options: SPDT Single Pole, Double Throw,
Snap action contacts (1NC/1NO)
Zb
OPTIONS
Side rotary plastic roller
REFERENCE
EVN2000A
Top roller plunger, parallel
REFERENCE
EVN2000C
Top pin plunger
REFERENCE
EVN2000B
Top roller plunger, perpendicular
REFERENCE
EVN2000D
Operating characteristics
Actuator Operating Free Pretravel Travel to Overtravel Differential Operating
type torque/force position positive opening travel point
(OF) (FP) (PT) (PO) (OT) (DT) (OP)
Side
rotary
0,120 N m 0° 25° 45° 45° 12° 25°
A (1.10 lb in)
Top pin
plunger
16,0 N 20,0 mm 2,0 mm 3,5 mm 4,0 mm 1,0 mm 18,0 mm
B (3.60 lb) (0.79 in) (0.08 in) (0.14 in) (0.16 in) (0.04 in) (0.71 in)
Top roller
plunger,
16,0 N 30,0 mm 2,0 mm 3,5 mm 4,0 mm 1,0 mm 28,0 mm
parallel (3.60 lb) (1.18 in) (0.08 in) (0.14 in) (0.16 in) (0.04 in) (1.10 in)
C
Top roller
plunger,
16,0 N 30,0 mm 2,0 mm 3,5 mm 4,0 mm 1,0 mm 28,0 mm
perpendicular (3.60 lb) (1.18 in) (0.08 in) (0.14 in) (0.16 in) (0.04 in) (1.10 in)
D
Actuators