Hitachi C47-WD8000 - Manual (Page 55)

55
ASPECT MODE
ƽTo switch aspect mode, please press the P.SIZE button, the TV will display the corresponding aspect mode
momentarily at the lower part of the screen. For example, set the current aspect mode to lj16:9NJ as shown at
the lower left side. If lj16:9 ZoomNJ is set as shown at the lower right side, you can press the Ÿ ź cursor
buttons to adjust the display position up and down before the words Ālj16 : 9Zoom +3NJ Scroll”
disappear as shown at the lower right side. Likewise, the function is available in lj4:3Zoom1NJ, lj4:3Zoom2NJ
orljExpandedNJmode.
ƽIf you change program No. or power on the TV, the aspect mode will not change.
3. When HD component signal is received
ƽPress the P.SIZE button to switch between three different modes,lj16:9NJ,ljExpandedNJandlj16:9ZoomNJ.
ƽIf you change program No. or power on the TV, the aspect mode will return to the mode of lj16:9NJ.
Please see the following on each of three modes for details.
Signal Sources


Suggested
aspect
mode
lj  NJ lj˖ =RRPNJ6FUROO
HD Signal
lj  NJ
lj  =RRPNJ
HD Signal
lj([SDQGHGNJ
HD Signal