Honeywell EKZ008200B - Manual (Page 12)

To adjust beep level :
• Press the total set arming key
• Press the 8 key
• Enter beep level from 1 to 7
A double beep on the keypad will confirm the change
To exit programming :
• Press the “off” key
WARNING: The system will automatically exit programming mode after 15 seconds if no keys
have been pressed and the red light will turn off. If this occurs you must restart this process
from the beginning.
E
N
G
L
I
S
H
- 11 -
Total set arming + CODE or TAG
Part set arming + CODE or TAG
Annex set arming + CODE or TAG
Disarming Enter CODE or present TAG
Disarming under duress Enter DURESS CODE = CODE + 1
Alert
Enter programming + + MASTER CODE OR MASTER TAG
Change user code User ID 0-9 + enter new CODE
+ enter new CODE again
Change user TAG User ID 0-9 + present new TAG
Change beep level + + enter beep level 1-7
Exit programming