HP E1459A - Manual (Page 63)

62 HP E1459A SCPI Command Reference
STATus:OPERation:CONDition?
Returns the value of the Operation Status Condition Register as a signed 16 bit
integer.
Parameters None
Comments •
The only bit in this register used by the HP E1459A is bit 9 (decimal weight
512) which contains the summary of the Operation Status Port register.
•
The Status Operation Condition register is not cleared by this command. It is
cleared only by executing the PSUMmary:EVENt command.
•
*RST clears all Status Operation Conditions.
•
*CLS does not affect the contents of the of the Status Operation Conditions.
•
The STATus:PRESet command does not affect the Status Operation
Conditions.
STATus:OPERation:ENABle < mask>
Sets the value of the OPERation Status Enable Register.
Parameters
Comments •
<mask> determines which OPERation Status conditions are summed. See
Figure 3-1. The events detected in the Port Summary Status Register are
reported in bit 9 of the Operation Status Register which in turn is reported in
bit 7 of the Status Byte Register.
•
*RST and *CLS do not affect the value of the enable mask.
•
STATus:PRESet sets the value of the enable mask to 0.
Example STAT:OPER:ENAB 0xFFFF Enable all bits of the Operation Status
Enable Register
Parameter Name Parameter Type Range of Values Default
< mask> numeric -32768 to 32767 (0000
h
to FFFF
h
) 0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com