Connecting external video sources, First time use – Hitachi 65F710A User Manual

Page 16

Advertising

CONNECTING A COMPONENT SOURCE WITH
HDMI OR DVI CAPABILITY TO INPUT 1

Connect the HDMI or DVI to HDMI connection
cable from the output of the HDTV set top box or
DVD player to the HDMI input as shown on the TV
to the right. When using a component with DVI
output, you also have to connect the AUDIO OUT
(R/L) of the component to the AUDIO IN (R/L) of
INPUT 1.

Press the INPUTS button, then select INPUT 1
from the INPUTS menu to view the program from
the HDTV set top box or DVD player. The VIDEO
OSD label disappears automatically after
approximately four seconds.

Select CABLE from the INPUTS menu to return to
the last channel tuned.

NOTE: 1. Completely insert the connection cord

plugs when connecting to rear panel jacks.
The picture and sound that is played back
will be abnormal if the connection is loose.

2. The HDMI input on INPUT 1 contains the

copy protection system called High-
bandwidth Digital Content Protection
(HDCP). HDCP is a cryptographic system
that encrypts video signals when using
HDMI connections to prevent illegal
copying of video contents.

3. HDMI is not a “NETWORK” technology. It

establishes a one-way point-to-point
connection for delivery of uncompressed
video to a display.

4. The connected digital output device

controls the HDMI interface so proper
set-up of device user settings determines
final video appearance.

Connecting External Video Sources

First time use

A
U
D

D
E
O

(MONO)

Y/
VIDEO

MONITOR OUT

AUDIO

TO HI-FI

INPUT 1

CABLE

AIR

INPUT 2

TV AS CENTER

INPUT 3 INPUT 4

CableCARD™

CAUTION

(Top of card faces right)

Top faces

OPTICAL OUT

Digital Audio

Upgrade Card

HDMI INPUT 1

Apparatus Claims of U.S.
Patent Nos. 4,631,603;
4,577,216; 4,819,098;
4,907,093; and 6,381,747
licensed for limited
viewing uses only.

DVD Player or HDTV STB

HDMI – HDMI

HDMI OUT