Hitachi 65F710A - Manual (Page 61)

61
65” Disassembly/Assembly Instructions
ASSEMBLY PROCEDURE
STEP 7
To re-assemble the set, lift the top portion and align onto the bottom cabinet.
Gently lower the top portion until it sits flush on the bottom.
STEP 8
Re-install the joint connector bolts (4 pcs.) that were removed in step 4 of the
disassembly.
STEP 9
Re-install the top (4) four screws into the lower rear cover.
STEP 10
Re-connect the sensor connector to the sensor
board, see (a). Re-install the sensor box, see (b).
STEP 11
Re-install the 8 screws that hold the frame to the cabinet on the front side of the TV.
STEP 12
Re-install both of
the front decoration
panels, see (a) and
(b) Re-install the
speaker grille,
aligning it with the
bottom cabinet,
see (c).
This completes the Disassembly and Assembly instructions.
(a) (b)
(a) (b) (c)
Useful Information