Huffy SKM 3072-U - Manual (Page 9)

P/N 205343A 7/97 9
Make final adjustments to level the goal rim. If the
backboard and goal rim are tipped back, raise collar (12)
until level and tighten. If backboard and goal rim are
tipped forward, lower collar (12) until level and tighten.
Maximum adjustment travel is 81-91cm (32” to 36”) from
bottom of pole to top of collar (12).
Release Lever
IMPORTANT!
Push up,
pivot toward pole
and lower to lock.
Push up and
pivot bar away
from pole
to raise and
lower.
Adjusting the Height
Broom Handle
or Wooden Bar
(not included)
25. 26.
3.05 m
(10 feet)
Regulation goal rim height
is 3.05 m (10 feet ).
IMPORTANT!
Add 7.6 liters (two gallons) of
NON-TOXIC ANTIFREEZE
in sub-freezing climates.
24.
Insert the end of a broom handle or wooden
bar 19-22 mm (3/4”-7/8”) diameter into the
release lever.
Roll completed assembled component to
desired position. Fill base with water
approx. 106 liters (28 gallons) or sand
approx. 102 kg (225 lb.) and snap cap
(43) in place. Secure component to
ground using rope (44) and tie down
stake (45).
45
43
44
DO NOT LEAVE
COMPONENTS UNDER
ASSEMBLY UNATTENDED
WHEN EMPTY, MAY TIP OVER.
WARNING
12