Fuel shut off valve, Cutting height adjuster, Controls – Husqvarna 965881201 User Manual

Page 22

Advertising
background image

CONTROlS

22

-Husqvarna

Fuel Shut Off Valve

The fuel shut off valve is located at the left rear of the

seat. The valve is off when the handle tab is turned

perpendicular to the fuel line.

8011-419

Fuel shut off valve in the CLOSED position

Cutting Height Adjuster

To set the desired deck cutting height, press the

release button and move the lever forward to the

correct cutting height on the cutting plate. The cutting

height range is from 1½" (38mm) to 4"

(102mm) in

½" (13mm) increments. The heights are measured

from the ground up to the blade tip with the engine not

running.

8058-019

The mower deck’s lifting lever

IMPORTANT INFORMATION
In order to obtain an even cutting height, it is

important that the air pressure in all tires is 15

psi / 103 kPa / 1 bar.

IMPORTANT INFORMATION
Always raise the deck to the highest position

for transport.

Advertising
This manual is related to the following products: