Hitachi LE40H405 - Manual (Page 7)

Insert the bracket to the base,and fix them with 6 screws.
Put the TV set on the level table on which there is a pad cloth or other soft material.
Lay down the TV set and make sure the LCD screen is downward.
Then fix the base to the set with 4 screws.
pedestal
4 screws
4 screws
The figure below is just for reference,please see the real set.
The length of Base Screws must be between 10mm and 12mm,otherwise the TV would be damaged.
WARNING:
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform
above steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the 4 screws from the back.
Type A
Type B