HP 2520G-POE - Manual (Page 21)

2-1
2
Installing the Switch
This chapter provides installation information for the 2520G-PoE switches.
Included Parts
The 2520G-PoE switches have the following components:
■ Documentation kit
■ Console port serial cable (DB-9 to RJ-45)
■ Accessory kits:
• Read Me First
• Switch Quick Setup Guide
• Safety and Regulatory information
• Software License, Warranty, and Support information
Switch 2520G-24-PoE Switch 2520G-8-PoE
Kit number 5069-6535
Contains:
• two mounting brackets
• eight 8-mm M4 screws to attach the
mounting brackets to the switch
• four 5/8-inch number 12-24 screws to
attach the switch to a rack
• four rubber feet
Kit number 5070-6881
Contains:
• two mounting brackets
1
• four 8-mm M4 screws to attach the
mounting brackets to the switch
• four rubber feet
• cable tie for power cord
1
For wall mounting the Switch 2520G-8-PoE. For rack mounting, an optional bracket kit,
5070-6570, is available. Visit www.hp.com/go/procurve-parts .