HP Media Vault - Manual (Page 56)

How to enable the power-saving mode
Your HP Media Vault comes with power-saving mode enabled. After one-hour of inactivity, your media vault's
internal hard disk spins down. When activity on your network again accesses the media vault’s hard drive, the
hard disk automatically spins up.
When you use power-saving mode, you lower power consumption, and your media vault’s internal hard drive
experiences less wear and tear.
To access the System Settings screen:

Double-click the HP Media Vault icon on your desktop.

Click Customize your HP Media Vault’s setting.

If the Welcome Screen appears, click Configure Device.

Click the System Settings tab.
To make changes to the power-saving mode:

To change the default time settings, click the Hours and Minutes drop-down lists.

To turn off power-saving mode, clear the Enable Power Saving Mode checkbox.
When you are finished making changes, click Accept, or Cancel. (If you click Cancel, any changes that you
made will not be accepted.)