HP Media Vault - Manual (Page 72)

How to create a Shared Folder in user-based
mode
To access the Shared Folder screen:

Double-click the HP Media Vault icon on your desktop.

Click Customize your HP Media Vault’s setting.

If the Welcome Screen appears, click Configure Device.

Click the Shared Folders tab.
To create a Shared Folder in user-based mode:
1. Click Create New Shared Folder.
2. In the New Shared Folder Name box, enter a descriptive name.
3. From the
Volume drop-down list, choose the disk volume on which the new Shared Folder will reside.
(For more information on disk volumes, see Hard drive settings .)
Before changing the default access mode from Network Computers, see Supported Protocols at How to use
the Shared Folders screen .
4. Complete one or more of the following steps:

Click Network Computers ( CIFS ). Select either Read-only access or Full Access. Your media
vault automatically defaults to Full Access.

Click Network Computers ( NFS ). Select either Read-only access or Full Access. Your media
vault automatically defaults to Full Access.

Click Web Browser . Select either Read-only access or Full Access.

Click FTP . Select either Read-only access or Full Access.
The screen’s lower section contains an information box that lists your currently defined users and their
privilege levels . Each defined user must have a privilege level for every Shared Folder you create. To
assign privilege levels for each user:
5. Select a user from the Select Username drop-down list.
6. Select a privilege level from the Select Privilege Level drop-down list.
7. Click Add.
8. Repeat steps 5 through 7 for each defined user.
9. Click Accept or Cancel. (If you select Cancel, everything that you entered on this screen will not be
accepted.)