HP 3300 - Manual (Page 11)

english
7
print cartridges
using print cartridges
The printer uses these print cartridges:
The black (hp 27) print cartridge is
included with the hp deskjet 3400 series
printer only. Purchase the black (hp 27)
print cartridge separately for the hp
deskjet 3300 series printer.
For more information, see these sections
in the onscreen user’s guide:
• “maintaining print cartridges”
• “print cartridge recovery”
replacing print cartridges
To replace a print cartridge:
1. Press the Power button to turn on the
printer, then open the top cover.
The cradle moves to the center of the
printer.
2. Push down on the print cartridge and
slide it out of the print cartridge
cradle.
3. Unwrap the replacement print
cartridge, then pull the tab to remove
the plastic tape.
Caution! To prevent clogs, ink failure, and
bad electrical connections, do not touch
the print cartridge ink nozzles or copper
contacts, and do not remove the copper
strips.
4. Slide the print cartridge firmly into the
cradle at a slight upward angle until
you feel resistance.
5. Push the cartridge into the cradle.
You hear a snap when the print
cartridge is correctly positioned.
6. Close the top cover.
7. Verify that plain paper is loaded
in the paper tray, then print a
calibration page to align the print
cartridges.
For instructions on aligning the print
cartridges, see “calibrating print
cartridges” in the onscreen user’s
guide.
print
cartridge selection
number product
number
black C8727
tri-color C8728
XbowRG.book Page 7 Friday, March 1, 2002 3:42 PM