Lights – HONDA 2009 Pilot User Manual

Page 494

Advertising
background image

Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.

Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.

Remove the front fog light
assembly from the bumper.

Open the tailgate.

Remove the two mounting bolts
with an 8 mm wrench.

Remove the assembly from the
mounting holes by pulling it out.

Place a cloth on the inner edge of
the assembly. Loosen the
assembly by carefully prying on
the top and side edges with a small
flat-tipped screwdriver. Use your
fingers to further pull it loose.

1.

3.

3.

4.

2.

2.

4.

Lights

Replacing Rear Bulbs
(in Rear Pillar)

490

CONNECTOR

2009 Pilot

Advertising
This manual is related to the following products: