Changing a flat tire – HONDA 2009 Pilot User Manual
Page 522
Advertising
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Insert the hoist bracket into the
center hole of the flat tire.
Remove the center cap from the
flat tire, and place the flat tire
under the hoist, with the valve
stem facing up.
20.
21.
22.
Changing a Flat Tire
518
94 lbf·ft (127 N·m , 13 kgf·m)
2009 Pilot
Advertising
This manual is related to the following products: