Document Outline

• Chapter 1 - Introduction
  • About the MicroRouter 1250i
  • A Note About Firewalls
  • A Note About On-Demand Internetworking
  • MicroRouter 1250i Installation Overview
• Chapter 2 - Getting Started
  • A Few Notes
    • Please Read The Manuals
    • Warranty and Service
    • Getting Help With the MicroRouter 1250i
  • What You Will Need To Get Started
    • Supplied with the MicroRouter 1250i
    • Needed For Installation
    • Ethernet Connection Requirements
      • 10Base-T Twisted-Pair Ethernet
    • T1 Line Connection Requirements
    • Other Telco Line Connection Requirements
      • RS-232 Interface
• Chapter 3 - Network Installation
  • Placing the Router
  • Connecting the Router to the Ethernet
    • Connecting to Twisted-Pair Ethernet
  • Connecting the Router to a T1 Line
  • Connecting a Line Device to the Secondary Port
    • Connecting Devices to the RS-232C Interface
  • Connecting an Out-of-Band Management Console
  • Powering Up the Router
• Chapter 4 - CompatiView Software Installation
  • CompatiView for Windows
    • System Requirements
    • Installation and Operation
    • Transport Protocols and CompatiView
• Chapter 5 - Command Line Management
  • Out-of-Band Command Line Management
  • Temporarily Reconfiguring a Host for Command Line Management
  • Setting Up Telnet Operation
• Chapter 6 - Basic Configuration Guide
  • Ethernet Interface Configuration
    • IP Protocol
      • Required for IP
      • Suggested for IP
    • IPX Protocol
      • Required for IPX
      • Suggested for IPX
  • WAN Interface Configuration
    • Internal T1 CSU/DSU (WAN 0) Physical Communications Settings
      • Required for Dedicated Line Operation
      • Suggested for Dedicated Line Operation
    • RS-232 (WAN 1) Physical Communications Settings
    • PPP Configuration
      • Internal T1 CSU/DSU (WAN 0) Link Configuration
        • Required for Dedicated Line Operation
        • Suggested for Dedicated/Leased Line Operation
      • RS-232 (WAN 1) Link Configuration
        • Required for Dedicated/Leased Line Operation
        • Suggested for Dedicated/Leased Line Operation
        • Required for Dial-On-Demand Operation
        • Suggested for Dial-On-Demand Operation
      • IP Protocol
        • Required for IP
        • Suggested for IP
      • IPX Protocol
        • Required for IPX
        • Suggested for IPX
    • Frame Relay Configuration
      • Internal T1 CSU/DSU (WAN 0) Link Configuration
        • Required for Dedicated/Leased Line Operation
        • Suggested for Dedicated/Leased Line Operation
      • RS-232 (WAN 1) Link Configuration
        • Suggested for Dedicated/Leased Line Operation
      • Frame Relay DLCI Mappings
      • IP Protocol
        • Required for IP Numbered Interface
        • Required for IP Unnumbered Interface
        • Suggested for IP
      • IPX Protocol
        • Required for IPX
        • Suggested for IPX
    • WAN 0 SMDS Configuration
      • Internal T1 CSU/DSU (WAN 0) Link Configuration
      • SMDS Addressing
  • Saving a Configuration File to Flash ROM
• Appendix A - Shipping Defaults
  • Default Password
  • Ethernet Interface
    • IP Routing Defaults
    • IP Bridging Defaults
    • IPX Routing Defaults
    • IPX Bridging Defaults
  • WAN Interfaces
    • IP Defaults
    • IPX Defaults
    • T1 CSU/DSU (WAN 0) Link & Physical Defaults
    • RS-232 (WAN 1) Link & Physical Defaults
• Appendix B - Connector and Cable Pin Outs
  • Pin Outs for T1 Female Connector (DTE)
  • Pin Outs for DB-25 Male to DB-25 Female RS-232 Data & Console Cable
• Appendix C - LED Patterns and Test Switch Settings
  • MicroRouter 1250i LED Patterns
    • Power On, No Traffic
    • Ethernet Traffic Indicators (Ethernet LED Bar)
    • WAN Indicators (WAN LED Bar)
    • Other Indicators (on All LED Bars)
  • MicroRouter 1250i Switch Settings
• Appendix D - Downloading Software From Compatible Systems
• Appendix E - Terms and Conditions