Document Outline

• M3096GX/M3093GX/M3093DG IMAGE SCANNER OEM MANUAL
• REVISION RECORD
• CONTENTS
  • FIGURES
  • TABLES
• CHAPTER 1GENERAL
  • 1.1 General Description
  • 1.2 Features
• CHAPTER 2SPECIFICATIONS
  • 2.1 Function Specifications
  • 2.2 Physical Specifications
  • 2.3 Option
    • 2.3.1 Image processing circuit (IPC>2 or IPC>2D)
      • 2.3.1.1 Dynamic threshold function
      • 2.3.1.2 Image processing function
    • 2.3.2 Compression circuit>2 (CMP>2) (M3096GX/M3093GX)
    • 2.3.3 Memory (M3093DG)
• CHAPTER 3CONFIGURATION
  • 3.1 Dimensions
  • 3.2 Circuit Configuration
  • 3.3 Carrier Fixing Bracket Removal
  • 3.4 Power Switch
  • 3.5 Indication Panel Functions a
    • 3.5.1 Indicators
• CHAPTER 4INTERFACE
  • 4.1 Physical Specifications
  • 4.2 SCSI Bus
    • 4.2.1 System configuration
    • 4.2.2 Bus signals
    • 4.2.3 Bus signal drive conditions
  • 4.3 Bus Phases
    • 4.3.1 BUS FREE phase
    • 4.3.2 ARBITRATION phase
    • 4.3.3 SELECTION phase
    • 4.3.4 RESELECTION phase
    • 4.3.5 INFORMATION TRANSFER phases
  • 4.4 Commands
    • 4.4.1 RESERVE UNIT command
    • 4.4.2 RELEASE UNIT command
    • 4.4.3 INQUIRY command
    • 4.4.4 REQUEST SENSE command
    • 4.4.5 SEND DIAGNOSTIC command
    • 4.4.6 TEST UNIT READY command
    • 4.4.7 SET WINDOW command
    • 4.4.8 SET SUBWINDOW command
    • 4.4.9 OBJECT POSITION command
    • 4.4.10 SEND command
    • 4.4.11 READ command
    • 4.4.12 MODE SELECT (6)
    • 4.4.13 MODE SENSE (6)
    • 4.4.14 SCAN
  • 4.5 Status: STATUS phase (target Æ initiator)
  • 4.6 Messages
    • 4.6.1 ATN detection
    • 4.6.2 Message types
  • 4.7 Command Sequence
    • 4.7.1 Initial sequence
    • 4.7.2 Command sequence to read
    • 4.7.3 READ command sequence
      • 4.7.3.1 Multiple read (M3096GX/M3093GX without CMP>2 option: disconnect disabled)
      • 4.7.3.2 Multiple read (M3096GX/M3093GX without CMP>2 option: disconnect enabled)
      • 4.7.3.3 Single read (M3096GX/M3093GX with CMP>2 option or M3093DG: disconnect disabled)
      • 4.7.3.4 Single read (M3096GX/M3093GX with CPM>2 option or M3093DG: disconnect enabled)
      • 4.7.3.5 Multiple read (M3096GX/M3093GX with CMP>2 option or M3093DG: disconnect disabled)
      • 4.7.3.6 Multiple read (M3096GX/M3093GX with CMP>2 option or M3093DG: disconnect enabled)
  • 4.8 Status Transition of Logical Unit
  • 4.9 Error Table
  • 4.10 Items for Specifying Window and Subwindow
  • 4.11 Output Data for Gray Scale Read
• APPENDIX A PAPER SPECIFICATIONS
  • A.1 Paper Size a a
  • A.2 Paper Conditions
    • A.2.1 Paper type
    • A.2.2 Paper weight
    • A.2.3 Items to avoid
    • A.2.4 ADF document feeder capacity
  • A.3 Paper Limitations (for ADF Reading Only)
    • A.3.1 Areas that must not be perforated
  • A.4 Grounding Color Area
  • A.5 Job Separation Sheet
    • A.5.1 Shape
    • A.5.2 Paper conditions
• APPENDIX B ADF SCANNING SPEED
• APPENDIX C DROP>OUT COLOR
  • C.1 Print Density Measurement
  • C.2 Drop>out Color Standard
• APPENDIX D DIFFERENCES BETWEEN THE M3096GX AND M3096G IMAGE SCANNERS
  • D.0 Preface
  • D.1 Enhanced Functions and Functional Differences
    • D.1.1 Functions added
      • D.1.1.1 Paper size detection
      • D.1.1.2 Job separation sheet detection
      • D.1.1.3 Error diffusion
      • D.1.1.4 Contrast
      • D.1.1.5 Gamma correction
      • D.1.1.6 Dynamic threshold
      • D.1.1.7 Lamp timer function
      • D.1.1.8 Added sense code
  • D.2 Supplement
    • D.2.1 Unified terminology
    • D.2.2 Corrections
    • D.2.3 Notes on compatibility
      • D.2.3.1 Resolution
      • D.2.3.2 Brightness
      • D.2.3.3 Threshold
      • D.2.3.4 Downloaded dither pattern and Brightness
      • D.2.3.5 Simplified DTC
• APPENDIX E CHANGING PRODUCT IDENTIFICATION
  • E.1 Change from M3093GX or M3096GX to M3096G
  • E.2 Change from M3093GX or M3096GX to M3097G
  • E.3 Change from M3093DG to M3093GX/M3096G/M3099G
• APPENDIX F WHITE LEVEL FOLLOWING ALGORITHM
• Reader Comment Form