FUJITSU M3093DG - Manual (Page 167)

*1: If DTC is specified, IPC can be specified but not enabled.
*2: The image is not guaranteed.
*3: Can be specified but not enabled if outline emphasis is also specified.
*4: Can be specified but not enabled if outline extraction is also specified.
*5: Not recommended because the compression is inefficient.
*6: If any value other than contrast X'80' (00) and reverse image format are
specified, the last two digits of the output data are 0.
*7: Back>side gray scale reading is not supported by M3093DG.
4.11 Output Data for Gray Scale Read
The output of the following data is restricted according to the gamma pattern and
contrast specifications (SET WINDOW: vendor>specific parameter).
Gamma pattern specification Contrast Data to be output
00 (built>in linear) 80 (00) 256 graduations
00 (built>in linear) Other than 80 (00)
Other than built>in linear
Download pattern
XX
8>bits of data, last
two bits 0
4 $ 135