FUJITSU M3093DG - Manual (Page 112)

(j) RIF (reverse image format): Byte 1D
This bit is used to reverse the binary image data output.
0: Output is not reversed
1: Output is reversed
(k) Vender unique parameter: byte 28 and after
Specifies, in byte 28 and after, a vender unique identification parameter,
including items such as outline, emphasis, and automatic separation, as
required. This parameter is specified in the following format. This
parameter does not need data until byte 3E. (It is unnecessary to transfer
the unnecessary parameter but the intermediate parameter cannot be
omitted.)
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
Vender unique identification code
d Pattern number
Outline extraction
Image emphasis
Automatic separation
Reserved
DTC selection
Reserved
Variance rate
f Vender unique identification code: byte 28
Specifies a vender unique identification code. For this scanner, X©00π
must be specified. If other value is specified, this scanner returns the
following error information:
f Status: 00001 (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
4 $ 80