FUJITSU M3093DG - Manual (Page 149)

Example:
BUS FREE
Ø
ARBITRATION
Ø
SELECTION
Ø
MESSAGE OUT (IDENTIFY: BIT6=1)
Ø
COMMAND (READ command)
Ø
MESSAGE IN (DISCONNECT message)
Ø
BUS FREE
.
.
.
.
The data to be transferred to the initiator is prepared during this
interval.
RESELECTION
Ø
MESSAGE IN (IDENTIFY message)
Ø
DATA IN (Transfer of image data)
Ø
MESSAGE IN (SAVE DATA POINTER message)
Ø
MESSAGE IN (DISCONNECT message)
Ø
BUS FREE
.
.
.
The data to be transferred to the initiator is prepared during this
interval.
RESELECTION
Ø
MESSAGE IN (IDENTIFY message)
Ø
DATA IN (Transfer of image data)
Ø
STATUS (GOOD status)
Ø
MESSAGE IN (COMMAND COMPLETE message)
Ø
BUS FREE
Note:
When no CMP II option is provided, the disconnection is performed.
Refer to note 4 in section 4.7.3.
4 $ 117