Document Outline

• Operation & Safety Manual
  • Foreword
  • Section 1. Safety Precautions
    • 1.1 General
    • 1.2 Pre-Operation
      • Operator Training and Knowledge
      • Workplace Inspection
      • Machine Inspection
    • 1.3 Operation
      • General
      • Trip and Fall Hazards
      • Electrocution Hazards
      • Tipping Hazards
      • Crushing and Collision Hazards
    • 1.4 Towing, Lifting, and Hauling
    • 1.5 Maintenance
      • General
      • Maintenance Hazards
      • Battery Hazards
  • Section 2. Machine Preparation and Inspection
    • 2.1 General
    • 2.2 Preparation For Use
    • 2.3 Delivery and Periodic Inspection
      • Handrail Assemblies
      • Platform Assembly
      • Sizzor Arms
      • Electrical Cable
      • Pivot Pins
      • Lift Cylinder
      • Frame
      • Drive Hubs
      • Tire and Wheel Assemblies
      • Sliding Wear Pad Blocks
      • Hydraulic Oil Supply
      • Steer Cylinder
      • Steer Linkage
      • Steer Spindle Assemblies
      • Control Boxes (Console and Ground)
      • Battery
      • Engine
      • Hydraulic Pump and Valves
      • Platform Placards
      • Lock-Out Cylinders (If Equipped)
      • Leveling Jacks (If Equipped)
      • Traversing Platform (If Equipped)
    • 2.4 Daily Walk-Around Inspection
      • Overall Cleanliness
      • Placards
      • Operators and Safety Manual
      • Machine Log
      • Daily Lubrication
    • 2.5 Daily Functional Check
    • 2.6 Lockout Cylinder Check (If Equipped)
    • 2.7 Dual Fuel System
      • Changing from Gasoline to LP Gas
      • Changing from LP Gas to Gasoline
    • 2.8 Torque Requirements
  • Section 3. User Responsibilities and Machine Control
    • 3.1 General
    • 3.2 Personnel Training
      • Operator Training
      • Training Supervision
      • Operator Responsibility
    • 3.3 Operating Characteristics and Limitations
      • General
      • Placards
      • Capacities
      • Stability
    • 3.4 Controls and Indicators
      • Ground Control Station
      • Platform Control Station
  • Section 4. Machine Operation
    • 4.1 Description
    • 4.2 General
    • 4.3 Engine Operation
      • Starting Procedure
    • 4.4 Raising and Lowering (Lifting)
      • Raising
      • Lowering
    • 4.5 Traversing Platform (Optional)
    • 4.6 Steering
    • 4.7 Traveling (Driving)
      • Traveling Forward
      • Traveling in Reverse
    • 4.8 Parking and Stowing
    • 4.9 Platform Loading
    • 4.10 Safety Props
    • 4.11 Machine Tie Down
    • 4.12 Towing
  • Section 5. Emergency Procedures
    • 5.1 General
    • 5.2 Emergency Towing Procedures
    • 5.3 Emergency Controls and Their Locations
      • Emergency Stop Switch
      • Ground Control Station
      • Manual Descent (Engine/Pump Failure - Platform Controls)
      • Manual Descent (Engine/Pump Failure - Ground Controls)
      • Manual Descent (Complete Loss of Power)
      • Auxiliary Power (If Equipped) (Engine/Pump Failure - Platform Controls)
      • Auxiliary Power (If Equipped) (Engine/Pump Failure - Ground Controls)
    • 5.4 Emergency Operation
      • Use of Ground Controls
      • Operator Unable to Control Machine
      • Platform Caught Overhead
      • Righting of Tipped Machine
      • Post-Incident Inspection
    • 5.5 Incident Notification
  • Section 6. Inspection and Repair Log