JLG 500RTS Operator Manual - Manual (Page 41)

SECTION 5 - EMERGENCY PROCEDURES
3120828 – JLG Lift – 5-3
Righting of Tipped Machine
A forktruck of suitable capacity or equivalent equipment
should be placed under the elevated side of the chassis,
with a crane or other suitable lifting equipment used to lift
the platform while the chassis is lowered by the forklift or
other equipment.
Post-Incident Inspection
Following any accident, thoroughly inspect the machine
and test all functions first from the ground controls, then
from the platform controls. Do not lift above 3 m (10 ft)
until you are secure that all damage has been repaired, if
required, and that all controls are operating correctly.
5.5 INCIDENT NOTIFICATION
It is imperative that JLG Industries, Inc. be notified imme-
diately of any incident involving a JLG product. Even if no
injury or property damage is evident, the factory should
be contacted by telephone and provided with all neces-
sary details. Contact at 1-877-JLG-SAFE (554-7233)
between the hours of 8:00 AM - 4:45 PM Eastern Standard
time.
It should be noted that failure to notify the Manufacturer of
an incident involving a JLG Industries product within 48
hours of such an occurrence may void any warranty con-
sideration on that particular machine.