PLANET XGS3-24040 Instruction Manuals and User Guides
We have 4 Instruction Manuals and User Guides for XGS3-24040 PLANET
Manuals
Read manual
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 2 |
| Size: | 1.22 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 16 |
| Size: | 1.38 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 582 |
| Size: | 5.96 MB |
Show table of contents
Read manual
Document Outline
- Chapter 1 INTRODUTION
- Chapter 2 INSTALLATION
- Chapter 3 Switch Management
- Chapter 4 Basic Switch Configuration
- Chapter 5 File System Operations
- Chapter 6 Cluster Configuration
- Chapter 7 Port Configuration
- Chapter 8 Port Isolation Function Configuration
- Chapter 9 Port Loopback Detection Function Configuration
- Chapter 10 ULDP Function Configuration
- Chapter 11 LLDP Function Operation Configuration
- Chapter 12 Port Channel Configuration
- Chapter 13 Jumbo Configuration
- Chapter 14 VLAN Configuration
- Chapter 15 MAC Table Configuration
- Chapter 16 MSTP Configuration
- Chapter 17 QoS Configuration
- Chapter 18 PBR Configuration
- Chapter 19 IPv6 PBR Configuration
- Chapter 20 Flow-based Redirection
- Chapter 21 Layer 3 Forward Configuration
- Chapter 22 ARP Scanning Prevention Function Configuration
- Chapter 23 Prevent ARP, ND Spoofing Configuration
- Chapter 24 ARP GUARD Configuration
- Chapter 25 ARP Local Proxy Configuration
- Chapter 26 Gratuitous ARP Configuration
- Chapter 27 ND Snooping Configuration
- Chapter 28 DHCP Configuration
- Chapter 29 DHCPv6 Configuration
- Chapter 30 DHCP option 82 Configuration
- Chapter 31 DHCP Snooping Configuration
- Chapter 32 DHCPv6 Snooping Configuration
- Chapter 33 Routing Protocol Overview
- Chapter 34 Static Route
- Chapter 35 RIP
- Chapter 36 RIPng
- Chapter 37 OSPF
- Chapter 38 OSPFv3
- Chapter 39 BGP
- 39.1 Introduction to BGP
- 39.2 BGP Configuration Task List
- 39.3 Configuration Examples of BGP
- 39.3.1 Examples 1: configure BGP neighbor
- 39.3.2 Examples 2: configure BGP aggregation
- 39.3.3 Examples 3: configure BGP community attributes
- 39.3.4 Examples 4: configure BGP confederation
- 39.3.5 Examples 5: configure BGP route reflector
- 39.3.6 Examples 6: configure MED of BGP
- 39.3.7 Examples 7: example of BGP VPN
- 39.4 BGP Troubleshooting
- Chapter 40 MBGP4+
- Chapter 41 Black Hole Routing Manual
- Chapter 42 ECMP Configuration
- Chapter 43 IPv4 Multicast Protocol
- 43.1 IPv4 Multicast Protocol Overview
- 43.2 PIM-DM
- 43.3 PIM-SM
- 43.4 MSDP Configuration
- 43.4.1 Introduction to MSDP
- 43.4.2 Brief Introduction to MSDP Configuration Tasks
- 43.4.3 Configuration of MSDP Basic Function
- 43.4.4 Configuration of MSDP Entities
- 43.4.5 Configuration of Delivery of MSDP Packet
- 43.4.6 Configuration of Parameters of SA-cache
- 43.4.7 MSDP Configuration Examples
- 43.4.8 MSDP Troubleshooting
- 43.5 ANYCAST RP Configuration
- 43.6 PIM-SSM
- 43.7 DVMRP
- 43.8 DCSCM
- 43.9 IGMP
- 43.10 IGMP Snooping
- 43.11 IGMP Proxy Configuration
- Chapter 44 IPv6 Multicast Protocol
- Chapter 45 Multicast VLAN
- Chapter 46 ACL Configuration
- Chapter 47 802.1x Configuration
- 47.1 Introduction to 802.1x
- 47.1.1 The Authentication Structure of 802.1x
- 47.1.2 The Work Mechanism of 802.1x
- 47.1.3 The Encapsulation of EAPOL Messages
- 47.1.4 The Encapsulation of EAP Attributes
- 47.1.5 Web Authentication Proxy based on 802.1x
- 47.1.6 The Authentication Methods of 802.1x
- 47.1.7 The Extension and Optimization of 802.1x
- 47.1.8 The Features of VLAN Allocation
- 47.2 802.1x Configuration Task List
- 47.3 802.1x Application Example
- 47.4 802.1x Troubleshooting
- 47.1 Introduction to 802.1x
- Chapter 48 The Number Limitation Function of Port, MAC in VLAN and IP Configuration
- 48.1 Introduction to the Number Limitation Function of Port, MAC in VLAN and IP
- 48.2 The Number Limitation Function of Port, MAC in VLAN and IP Configuration Task Sequence
- 48.3 The Number Limitation Function of Port, MAC in VLAN and IP Typical Examples
- 48.4 The Number Limitation Function of Port, MAC in VLAN and IP Troubleshooting Help
- Chapter 49 Operational Configuration of AM Function
- Chapter 50 Security Feature Configuration
- 50.1 Introduction to Security Feature
- 50.2 Security Feature Configuration
- 50.2.1 Prevent IP Spoofing Function Configuration Task Sequence
- 50.2.2 Prevent TCP Unauthorized Label Attack Function Configuration Task Sequence
- 50.2.3 Anti Port Cheat Function Configuration Task Sequence
- 50.2.4 Prevent TCP Fragment Attack Function Configuration Task Sequence
- 50.2.5 Prevent ICMP Fragment Attack Function Configuration Task Sequence
- 50.3 Security Feature Example
- Chapter 51 TACACS+ Configuration
- Chapter 52 RADIUS Configuration
- Chapter 53 SSL Configuration
- Chapter 54 IPv6 Security RA Configuration
- Chapter 55 VLAN-ACL Configuration
- Chapter 56 RSPAN Configuration
- Chapter 57 sFlow Configuration
- Chapter 58 VRRP Configuration
- Chapter 59 IPv6 VRRPv3 Configuration
- Chapter 60 MRPP Configuration
- Chapter 61 ULPP Configuration
- Chapter 62 ULSM Configuration
- Chapter 63 SNTP Configuration
- Chapter 64 NTP Function Configuration
- Chapter 65 DNSv4/v6 Configuration
- Chapter 66 Monitor and Debug
- Chapter 67 Reload Switch after Specified Time
- Chapter 68 Debugging and Diagnosis for Packets Received and Sent by CPU
- Chapter 69 SWITCH OPERATION
- Chapter 70 TROUBLE SHOOTING
- Chapter 71 APPENDEX A
- Chapter 72 GLOSSARY
- EC Declaration of Conformity
| Recognized languages: | English |
|---|---|
| Pages: | 869 |
| Size: | 4.76 MB |
Show table of contents
Read manual
Document Outline
- Chapter 1 Commands for Basic Switch Configuration
- 1.1 Commands for Basic Configuration
- 1.1.1 Authentication line
- 1.1.2 boot img
- 1.1.3 boot startup-config
- 1.1.4 clock set
- 1.1.5 config
- 1.1.6 debug ssh-server
- 1.1.7 enable
- 1.1.8 enable password
- 1.1.9 end
- 1.1.10 exec-timeout
- 1.1.11 exit
- 1.1.12 help
- 1.1.13 hostname
- 1.1.14 ip host
- 1.1.15 ipv6 host
- 1.1.16 ip http server
- 1.1.17 language
- 1.1.18 login
- 1.1.19 password
- 1.1.20 reload
- 1.1.21 service password-encryption
- 1.1.22 service terminal-length
- 1.1.23 sysContact
- 1.1.24 sysLocation
- 1.1.25 set default
- 1.1.26 setup
- 1.1.27 show clock
- 1.1.28 show temperature
- 1.1.29 show tech-support
- 1.1.30 show version
- 1.1.31 username
- 1.1.32 web language
- 1.1.33 write
- 1.2 Commands for Telnet
- 1.2.1 authentication ip access-class
- 1.2.2 authentication ipv6 access-class
- 1.2.3 authentication line login
- 1.2.4 authentication securityip
- 1.2.5 authentication securityipv6
- 1.2.6 terminal length
- 1.2.7 terminal monitor
- 1.2.8 telnet
- 1.2.9 telnet server enable
- 1.2.10 telnet-server max-connection
- 1.2.11 ssh-server authentication-retries
- 1.2.12 ssh-server enable
- 1.2.13 ssh-server host-key create rsa
- 1.2.14 ssh-server max-connection
- 1.2.15 ssh-server timeout
- 1.2.16 ssh-user
- 1.2.17 show ssh-server
- 1.2.18 show ssh-user
- 1.2.19 show telnet login
- 1.3 Commands for Configuring Switch IP
- 1.4 Commands for SNMP
- 1.4.1 debug snmp mib
- 1.4.2 debug snmp kernel
- 1.4.3 rmon enable
- 1.4.4 show snmp
- 1.4.5 show snmp engineid
- 1.4.6 show snmp group
- 1.4.7 show snmp mib
- 1.4.8 show snmp status
- 1.4.9 show snmp user
- 1.4.10 show snmp view
- 1.4.11 snmp-server community
- 1.4.12 snmp-server enable
- 1.4.13 snmp-server enable traps
- 1.4.14 snmp-server engineid
- 1.4.15 snmp-server group
- 1.4.16 snmp-server host
- 1.4.17 snmp-server securityip
- 1.4.18 snmp-server securityip
- 1.4.19 snmp-server view
- 1.4.20 snmp-server user
- 1.5 Commands for Switch Upgrade
- 1.1 Commands for Basic Configuration
- Chapter 2 File System Commands
- Chapter 3 Commands for Cluster
- 3.1 clear cluster nodes
- 3.2 cluster auto-add
- 3.3 cluster commander
- 3.4 cluster ip-pool
- 3.5 cluster keepalive interval
- 3.6 cluster keepalive loss-count
- 3.7 cluster member
- 3.8 cluster member auto-to-user
- 3.9 cluster reset member
- 3.10 cluster run
- 3.11 cluster update member
- 3.12 debug cluster
- 3.13 debug cluster packets
- 3.14 show cluster
- 3.15 show cluster members
- 3.16 show cluster candidates
- 3.17 show cluster topology
- 3.18 rcommand commander
- 3.19 rcommand member
- Chapter 4 Commands for Network Port Configuration
- Chapter 5 Commands for Port Isolation Function
- Chapter 6 Commands for Port Loopback Detection Function
- Chapter 7 Commands for ULDP
- Chapter 8 Commands for LLDP Function
- 8.1 lldp enable
- 8.2 lldp enable (Port)
- 8.3 lldp mode
- 8.4 lldp tx-interval
- 8.5 lldp msgTxHold
- 8.6 lldp transmit delay
- 8.7 lldp notification interval
- 8.8 lldp trap
- 8.9 lldp transmit optional tlv
- 8.10 lldp neighbors max-num
- 8.11 lldp tooManyNeighbors
- 8.12 show lldp
- 8.13 show lldp traffic
- 8.14 show lldp interface ethernet
- 8.15 show lldp neighbors interface ethernet
- 8.16 show debugging lldp
- 8.17 debug lldp
- 8.18 debug lldp packets
- 8.19 clear lldp remote-table
- Chapter 9 Commands for Port Channel
- Chapter 10 Commands for Jumbo
- Chapter 11 VLAN Configuration
- 11.1 Commands for VLAN Configuration
- 11.1.1 debug gvrp
- 11.1.2 dot1q-tunnel enable
- 11.1.3 dot1q-tunnel tpid
- 11.1.4 gvrp
- 11.1.5 garp timer hold
- 11.1.6 garp timer join
- 11.1.7 garp timer leave
- 11.1.8 garp timer leaveall
- 11.1.9 name
- 11.1.10 private-vlan
- 11.1.11 private-vlan association
- 11.1.12 show dot1q-tunnel
- 11.1.13 show garp
- 11.1.14 show gvrp
- 11.1.15 show vlan
- 11.1.16 show vlan-translation
- 11.1.17 switchport access vlan
- 11.1.18 switchport hybrid allowed vlan
- 11.1.19 switchport hybrid native vlan
- 11.1.20 switchport interface
- 11.1.21 switchport mode
- 11.1.22 switchport trunk allowed vlan
- 11.1.23 switchport trunk native vlan
- 11.1.24 vlan
- 11.1.25 vlan-translation
- 11.1.26 vlan-translation enable
- 11.1.27 vlan-translation miss drop
- 11.1.28 vlan ingress enable
- 11.2 Commands for Dynamic VLAN Configuration
- 11.2.1 dynamic-vlan mac-vlan prefer
- 11.2.2 dynamic-vlan subnet-vlan prefer
- 11.2.3 mac-vlan
- 11.2.4 mac-vlan vlan
- 11.2.5 protocol-vlan
- 11.2.6 show dynamic-vlan prefer
- 11.2.7 show mac-vlan
- 11.2.8 show mac-vlan interface
- 11.2.9 show protocol-vlan
- 11.2.10 show subnet-vlan
- 11.2.11 show subnet-vlan interface
- 11.2.12 subnet-vlan
- 11.2.13 switchport mac-vlan enable
- 11.2.14 switchport subnet-vlan enable
- 11.3 Commands for Voice VLAN Configuration
- 11.1 Commands for VLAN Configuration
- Chapter 12 Commands for MAC Address Table Configuration
- 12.1 Commands for MAC Address Table Configuration
- 12.2 Commands for Mac Address Binding configuration
- 12.2.1 clear port-security dynamic
- 12.2.2 show port-security
- 12.2.3 show port-security address
- 12.2.4 show port-security interface
- 12.2.5 switchport port-security
- 12.2.6 switchport port-security convert
- 12.2.7 switchport port-security lock
- 12.2.8 switchport port-security mac-address
- 12.2.9 switchport port-security maximum
- 12.2.10 switchport port-security timeout
- 12.2.11 switchport port-security violation
- Chapter 13 ommands for MSTP
- 13.1 Commands for MSTP
- 13.1.1 abort
- 13.1.2 exit
- 13.1.3 instance vlan
- 13.1.4 name
- 13.1.5 revision-level
- 13.1.6 spanning-tree
- 13.1.7 spanning-tree forward-time
- 13.1.8 spanning-tree hello-time
- 13.1.9 spanning-tree link-type p2p
- 13.1.10 spanning-tree maxage
- 13.1.11 spanning-tree max-hop
- 13.1.12 spanning-tree mcheck
- 13.1.13 spanning-tree mode
- 13.1.14 spanning-tree mst configuration
- 13.1.15 spanning-tree mst cost
- 13.1.16 spanning-tree mst port-priority
- 13.1.17 spanning-tree mst priority
- 13.1.18 spanning-tree mst rootguard
- 13.1.19 spanning-tree portfast
- 13.1.20 spanning-tree priority
- 13.1.21 spanning-tree format
- 13.1.22 spanning-tree digest-snooping
- 13.1.23 spanning-tree tcflush (Global mode)
- 13.1.24 spanning-tree tcflush (Port mode)
- 13.2 Commands for Monitor and Debug
- 13.1 Commands for MSTP
- Chapter 14 Commands for QoS and PBR
- 14.1 class
- 14.2 class-map
- 14.3 match
- 14.4 mls qos
- 14.5 mls qos cos
- 14.6 mls qos aggregate-policy
- 14.7 mls qos trust
- 14.8 priority-queue out
- 14.9 queue bandwidth
- 14.10 set
- 14.11 service-policy
- 14.12 show class-map
- 14.13 show policy-map
- 14.14 show mls qos aggregate-policy
- 14.15 show mls qos interface
- 14.16 show mls qos maps
- 14.17 show mls-qos
- 14.18 wrr-queue bandwidth
- 14.19 wrr-queue cos-map
- Chapter 15 Commands for IPv6 PBR
- Chapter 16 Commands for Flow-based Redirection
- Chapter 17 Commands for Layer 3 Forwarding
- 17.1 Commands for Layer 3 Interface
- 17.2 Commands for IPv4/v6 configuration
- 17.2.1 clear ipv6 neighbor
- 17.2.2 debug ip packet
- 17.2.3 debug ipv6 packet
- 17.2.4 debug ipv6 icmp
- 17.2.5 debug ipv6 nd
- 17.2.6 debug ipv6 tunnel packet
- 17.2.7 ipv6 enable
- 17.2.8 ipv6 proxy enable
- 17.2.9 ip address
- 17.2.10 ipv6 address
- 17.2.11 ipv6 route
- 17.2.12 ipv6 redirect
- 17.2.13 ipv6 nd dad attempts
- 17.2.14 ipv6 nd ns-interval
- 17.2.15 ipv6 nd suppress-ra
- 17.2.16 ipv6 nd ra-lifetime
- 17.2.17 ipv6 nd min-ra-interval
- 17.2.18 ipv6 nd max-ra-interval
- 17.2.19 ipv6 nd prefix
- 17.2.20 ipv6 nd ra-hoplimit
- 17.2.21 ipv6 nd ra-mtu
- 17.2.22 ipv6 nd reachable-time
- 17.2.23 ipv6 nd retrans-timer
- 17.2.24 ipv6 nd other-config-flag
- 17.2.25 ipv6 nd managed-config-flag
- 17.2.26 ipv6 neighbor
- 17.2.27 ipv6 rthdr-type0 enable
- 17.2.28 interface tunnel
- 17.2.29 show ip traffic
- 17.2.30 show ipv6 interface
- 17.2.31 show ipv6 route
- 17.2.32 show ipv6 neighbors
- 17.2.33 show ipv6 traffic
- 17.2.34 show ipv6 enable
- 17.2.35 show ipv6 redirect
- 17.2.36 show ipv6 tunnel
- 17.2.37 description
- 17.2.38 tunnel source
- 17.2.39 tunnel destination
- 17.2.40 tunnel nexthop
- 17.2.41 tunnel 6to4-relay
- 17.2.42 tunnel mode
- 17.3 Commands for IP Route Aggregation
- 17.4 Commands for URPF
- 17.5 Commands for ARP Configuration
- Chapter 18 Commands for ARP Scanning Prevention
- 18.1 anti-arpscan enable
- 18.2 anti-arpscan port-based threshold
- 18.3 anti-arpscan ip-based threshold
- 18.4 anti-arpscan trust
- 18.5 anti-arpscan trust ip
- 18.6 anti-arpscan recovery enable
- 18.7 anti-arpscan recovery time
- 18.8 anti-arpscan log enable
- 18.9 anti-arpscan trap enable
- 18.10 show anti-arpscan
- 18.11 debug anti-arpscan
- Chapter 19 Commands for Preventing ARP, ND Spoofing
- Chapter 20 Command for ARP GUARD
- Chapter 21 Command for ARP Local Proxy
- Chapter 22 Commands for Gratuitous ARP Configuration
- Chapter 23 Commands for ND Snooping
- 23.1 clear ipv6 nd snooping binding
- 23.2 debug ipv6 nd snooping
- 23.3 ipv6 nd snooping enable (Global mode)
- 23.4 ipv6 nd snooping mac-binding-limit
- 23.5 ipv6 nd snooping max-dad-delay
- 23.6 ipv6 nd snooping max-dad-prepare-delay
- 23.7 ipv6 nd snooping max-sac-lifetime
- 23.8 ipv6 nd snooping policy
- 23.9 ipv6 nd snooping port-binding-limit
- 23.10 ipv6 nd snooping static-binding
- 23.11 ipv6 nd snooping trust
- 23.12 ipv6 nd snooping user-control
- 23.13 show ipv6 nd snooping
- 23.14 show ipv6 nd snooping mac-binding
- Chapter 24 Commands for DHCP
- 24.1 Commands for DHCP Server Configuration
- 24.1.1 bootfile
- 24.1.2 clear ip dhcp binding
- 24.1.3 clear ip dhcp conflict
- 24.1.4 clear ip dhcp server statistics
- 24.1.5 client-identifier
- 24.1.6 client-name
- 24.1.7 debug ip dhcp server
- 24.1.8 default-router
- 24.1.9 dns-server
- 24.1.10 domain-name
- 24.1.11 hardware-address
- 24.1.12 host
- 24.1.13 ip dhcp conflict logging
- 24.1.14 ip dhcp excluded-address
- 24.1.15 ip dhcp pool
- 24.1.16 ip dhcp conflict ping-detection enable
- 24.1.17 ip dhcp ping packets
- 24.1.18 ip dhcp ping timeout
- 24.1.19 lease
- 24.1.20 netbios-name-server
- 24.1.21 netbios-node-type
- 24.1.22 network-address
- 24.1.23 next-server
- 24.1.24 option
- 24.1.25 service dhcp
- 24.1.26 show ip dhcp binding
- 24.1.27 show ip dhcp conflict
- 24.1.28 show ip dhcp server statistics
- 24.2 Commands for DHCP Relay Configuration
- 24.1 Commands for DHCP Server Configuration
- Chapter 25 Commands for DHCPv6
- 25.1 clear ipv6 dhcp binding
- 25.2 clear ipv6 dhcp server statistics
- 25.3 debug ipv6 dhcp client packet
- 25.4 debug ipv6 dhcp detail
- 25.5 debug ipv6 dhcp relay packet
- 25.6 debug ipv6 dhcp server
- 25.7 dns-server
- 25.8 domain-name
- 25.9 excluded-address
- 25.10 ipv6 address
- 25.11 ipv6 dhcp client pd
- 25.12 ipv6 dhcp client pd hint
- 25.13 ipv6 dhcp pool
- 25.14 ipv6 dhcp relay destination
- 25.15 ipv6 dhcp server
- 25.16 ipv6 general-prefix
- 25.17 ipv6 local pool
- 25.18 lifetime
- 25.19 network-address
- 25.20 prefix-delegation
- 25.21 prefix-delegation pool
- 25.22 service dhcpv6
- 25.23 show ipv6 dhcp
- 25.24 show ipv6 dhcp binding
- 25.25 show ipv6 dhcp interface
- 25.26 show ipv6 dhcp local pool
- 25.27 show ipv6 dhcp pool
- 25.28 show ipv6 dhcp statistics
- 25.29 show ipv6 general-prefix
- Chapter 26 Commands for DHCP Option 82
- Chapter 27 Commands for DHCP Snooping
- 27.1 debug ip dhcp snooping packet interface
- 27.2 debug ip dhcp snooping packet
- 27.3 debug ip dhcp snooping update
- 27.4 debug ip dhcp snooping event
- 27.5 debug ip dhcp snooping binding
- 27.6 ip dhcp snooping
- 27.7 ip dhcp snooping binding
- 27.8 ip dhcp snooping binding user
- 27.9 ip dhcp snooping binding arp
- 27.10 ip dhcp snooping binding dot1x
- 27.11 ip dhcp snooping binding user-control
- 27.12 ip dhcp snooping binding user-control max-user
- 27.13 ip dhcp snooping trust
- 27.14 ip dhcp snooping action
- 27.15 ip dhcp snooping action MaxNum
- 27.16 ip dhcp snooping limit-rate
- 27.17 ip dhcp snooping information enable
- 27.18 ip dhcp snooping option82 enable
- 27.19 enable trustview key
- 27.20 ip user helper-address
- 27.21 show trustview status
- 27.22 show ip dhcp snooping
- Chapter 28 Commands for DHCPv6 Snooping
- 28.1 clear ipv6 dhcp snooping binding
- 28.2 debug ipv6 dhcp snooping binding
- 28.3 debug ipv6 dhcp snooping event
- 28.4 debug ipv6 dhcp snooping packet
- 28.5 ipv6 dhcp snooping action
- 28.6 ipv6 dhcp snooping action MaxNum
- 28.7 ipv6 dhcp snooping binding enable
- 28.8 ipv6 dhcp snooping binding nd
- 28.9 ipv6 dhcp snooping binding user
- 28.10 ipv6 dhcp snooping binding user-control
- 28.11 ipv6 dhcp snooping binding-limit
- 28.12 ipv6 dhcp snooping enable
- 28.13 ip dhcp snooping trust
- 28.14 show ipv6 dhcp snooping
- 28.15 show ipv6 dhcp snooping binding
- 28.16 show ipv6 dhcp snooping interface
- Chapter 29 Commands for Routing Policy
- 29.1 ip prefix-list description
- 29.2 ip prefix-list seq
- 29.3 ip prefix-list sequence-number
- 29.4 match as-path
- 29.5 match community
- 29.6 match interface
- 29.7 match ip
- 29.8 match ipv6 address
- 29.9 match ipv6 next-hop
- 29.10 match metric
- 29.11 match origin
- 29.12 match route-type
- 29.13 match tag
- 29.14 route-map
- 29.15 set aggregator
- 29.16 set as-path
- 29.17 set atomic-aggregate
- 29.18 set comm-list
- 29.19 set community
- 29.20 set extcommunity
- 29.21 set ip next-hop
- 29.22 set local-preference
- 29.23 set metric
- 29.24 set metric-type
- 29.25 set origin
- 29.26 set originator-id
- 29.27 set tag
- 29.28 set vpnv4 next-hop
- 29.29 set weight
- 29.30 show ip prefix-list <list-name>
- 29.31 show ip prefix-list<detail|summary>
- 29.32 show route-map
- 29.33 show router-id
- Chapter 30 Commands for Static Route
- Chapter 31 Commands for RIP
- 31.1 accept-lifetime
- 31.2 address-family ipv4
- 31.3 clear ip rip route
- 31.4 debug rip
- 31.5 debug rip redistribute message send
- 31.6 debug rip redistribute route receive
- 31.7 default-information originate
- 31.8 default-metric
- 31.9 distance
- 31.10 distribute-list
- 31.11 exit-address-family
- 31.12 ip rip aggregate-address
- 31.13 ip rip authentication key-chain
- 31.14 ip rip authentication mode
- 31.15 ip rip authentication string
- 31.16 ip rip authentication cisco-compatible
- 31.17 ip rip receive-packet
- 31.18 ip rip receive version
- 31.19 ip rip send-packet
- 31.20 ip rip send version
- 31.21 ip rip split-horizon
- 31.22 key
- 31.23 key chain
- 31.24 key-string
- 31.25 maximum-prefix
- 31.26 neighbor
- 31.27 network
- 31.28 offset-list
- 31.29 passive-interface
- 31.30 recv-buffer-size
- 31.31 redistribute
- 31.32 route
- 31.33 router rip
- 31.34 send-lifetime
- 31.35 show debugging rip
- 31.36 show ip protocols rip
- 31.37 show ip rip
- 31.38 show ip rip database
- 31.39 show ip rip interface
- 31.40 show ip rip aggregate
- 31.41 timers basic
- 31.42 version
- Chapter 32 Commands for RIPng
- 32.1 clear ipv6 route
- 32.2 default-information originate
- 32.3 default-metric
- 32.4 distance
- 32.5 distribute-list
- 32.6 debug ipv6 rip
- 32.7 debug ipv6 rip redistribute message send
- 32.8 debug ipv6 rip redistribute route receive
- 32.9 ipv6 rip aggregate-address
- 32.10 ipv6 rip split-horizon
- 32.11 ipv6 router rip
- 32.12 neighbor
- 32.13 offset-list
- 32.14 passive-interface
- 32.15 redistribute
- 32.16 redistribute ospf
- 32.17 route
- 32.18 router ipv6 rip
- 32.19 show debugging ipv6 rip
- 32.20 show ipv6 rip interface
- 32.21 show ipv6 rip redistribute
- 32.22 show ipv6 protocols rip
- 32.23 show ipv6 rip
- 32.24 show ipv6 rip database
- 32.25 show ipv6 rip aggregate
- 32.26 show ipv6 rip redistribute
- 32.27 timers basic
- Chapter 33 Commands for OSPF
- 33.1 area authentication
- 33.2 area default-cost
- 33.3 area filter-list
- 33.4 area nssa
- 33.5 area range
- 33.6 area stub
- 33.7 area virtual-link
- 33.8 auto-cost reference-bandwidth
- 33.9 compatible rfc1583
- 33.10 clear ip ospf process
- 33.11 debug ospf events
- 33.12 debug ospf ifsm
- 33.13 debug ospf lsa
- 33.14 debug ospf nfsm
- 33.15 debug ospf nsm
- 33.16 debug ospf packet
- 33.17 debug ospf route
- 33.18 debug ospf redistribute message send
- 33.19 debug ospf redistribute route receive
- 33.20 default-information originate
- 33.21 default-metric
- 33.22 distance
- 33.23 distribute-list
- 33.24 host area
- 33.25 ip ospf authentication
- 33.26 ip ospf authentication-key
- 33.27 ip ospf cost
- 33.28 ip ospf database-filter
- 33.29 ip ospf dead-interval
- 33.30 ip ospf disable all
- 33.31 ip ospf hello-interval
- 33.32 ip ospf message-digest-key
- 33.33 ip ospf mtu
- 33.34 ip ospf mtu-ignore
- 33.36 ip ospf priority
- 33.37 ip ospf retransmit-interval
- 33.38 ip ospf transmit-delay
- 33.39 key
- 33.40 key chain
- 33.41 log-adjacency-changes detail
- 33.42 max-concurrent-dd
- 33.43 neighbor
- 33.44 network area
- 33.45 ospf abr-type
- 33.46 ospf router-id
- 33.47 overflow database
- 33.48 overflow database external
- 33.49 passive-interface
- 33.50 redistribute
- 33.51 redistribute ospf
- 33.52 router ospf
- 33.53 show ip ospf
- 33.54 show ip ospf border-routers
- 33.55 show ip ospf database
- 33.56 show ip ospf interface
- 33.57 show ip ospf neighbor
- 33.58 show ip ospf redistribute
- 33.59 show ip ospf route
- 33.60 show ip ospf virtual-links
- 33.61 show ip route process-detail
- 33.62 show ip protocols
- 33.63 summary-address
- 33.64 timers spf
- Chapter 34 Commands for OSPFv3
- 34.1 area default cost
- 34.2 area range
- 34.3 area stub
- 34.4 area virtual-link
- 34.5 abr-type
- 34.6 default-metric
- 34.7 debug ipv6 ospf events
- 34.8 debug ipv6 ospf ifsm
- 34.9 debug ipv6 ospf lsa
- 34.10 debug ipv6 ospf nfsm
- 34.11 debug ipv6 ospf nsm
- 34.12 debug ipv6 ospf packet
- 34.13 debug ipv6 ospf redistribute message send
- 34.14 debug ipv6 ospf redistribute route receive
- 34.15 debug ipv6 ospf route
- 34.16 ipv6 ospf cost
- 34.17 ipv6 ospf dead-interval
- 34.18 ipv6 ospf display route single-line
- 34.19 ipv6 ospf hello-interval
- 34.21 ipv6 ospf retransmit-interval
- 34.22 ipv6 ospf transmit-delay
- 34.23 ipv6 router ospf
- 34.24 max-concurrent-dd
- 34.25 passive-interface
- 34.26 redistribute
- 34.27 redistribute ospf
- 34.28 router-id
- 34.29 router ipv6 ospf
- 34.30 show ipv6 ospf
- 34.31 show ipv6 ospf database
- 34.32 show ipv6 ospf interface
- 34.33 show ipv6 ospf neighbor
- 34.34 show ipv6 ospf route
- 34.35 show ipv6 ospf redistribute
- 34.36 show ipv6 ospf topology
- 34.37 show ipv6 ospf virtual-links
- 34.38 show ipv6 route process-detail
- 34.39 timers spf
- Chapter 35 Commands for BGP and MBGP4+
- 35.1 address-family
- 35.2 address-family ipv4
- 35.3 address-family vpnv4
- 35.4 aggregate-address
- 35.5 bgp aggregate-nexthop-check
- 35.6 bgp always-compare-med
- 35.7 bgp bestpath as-path ignore
- 35.8 bgp bestpath compare-confed-aspath
- 35.9 bgp bestpath compare-routerid
- 35.10 bgp bestpath med
- 35.11 bgp client-to-client reflection
- 35.12 bgp cluster-id
- 35.13 bgp confederation identifier
- 35.14 bgp confederation peers
- 35.15 bgp dampening
- 35.16 bgp default
- 35.17 bgp deterministic-med
- 35.18 bgp enforce-first-as
- 35.20 bgp inbound-route-filter
- 35.21 bgp inbound-max-route-num
- 35.22 bgp log-neighbor-changes
- 35.23 bgp network import-check
- 35.25 bgp rfc1771-strict
- 35.26 bgp router-id
- 35.27 bgp scan-time
- 35.28 clear ip bgp
- 35.29 clear ip bgp dampening
- 35.30 clear ip bgp flap-statistics
- 35.31 debug bgp
- 35.32 debug bgp redistribute message send
- 35.33 debug bgp redistribute route receive
- 35.34 debug ipv6 bgp redistribute message send
- 35.35 debug ipv6 bgp redistribute route receive
- 35.36 distance
- 35.37 distance bgp
- 35.38 exit-address-family
- 35.39 import map
- 35.40 ip as-path access-list
- 35.41 ip community-list
- 35.42 ip extcommunity-list
- 35.43 neighbor activate
- 35.44 neighbor advertisement-interval
- 35.45 neighbor allowas-in
- 35.46 neighbor attribute-unchanged
- 35.47 neighbor capability
- 35.48 neighbor capability orf prefix-list
- 35.49 neighbor collide-established
- 35.50 neighbor default-originate
- 35.51 neighbor description
- 35.52 neighbor distribute-list
- 35.53 neighbor dont-capability-negotiate
- 35.54 neighbor ebgp-multihop
- 35.55 neighbor enforce-multihop
- 35.56 neighbor filter-list
- 35.57 neighbor interface
- 35.58 neighbor maximum-prefix
- 35.59 neighbor next-hop-self
- 35.60 neighbor override-capability
- 35.61 neighbor passive
- 35.62 neighbor peer-group (Creating)
- 35.63 neighbor peer-group (Configuring group members)
- 35.64 neighbor port
- 35.65 neighbor prefix-list
- 35.66 neighbor remote-as
- 35.67 neighbor remove-private-AS
- 35.69 neighbor route-reflector-client
- 35.70 neighbor route-server-client
- 35.71 neighbor send-community
- 35.72 neighbor shutdown
- 35.73 neighbor soft-reconfiguration inbound
- 35.74 neighbor soo
- 35.75 neighbor strict-capability-match
- 35.76 neighbor timers
- 35.77 neighbor timers connect
- 35.78 neighbor unsuppress-map
- 35.79 neighbor update-source
- 35.80 neighbor version 4
- 35.81 neighbor weight
- 35.82 network (BGP)
- 35.83 redistribute (BGP)
- 35.84 redistribute ospf
- 35.85 redistribute ospf (MBGP4+)
- 35.86 rd
- 35.87 router bgp
- 35.88 route-target
- 35.89 set vpnv4 next-hop
- 35.90 show ip bgp
- 35.91 show ip bgp attribute-info
- 35.92 show ip bgp community
- 35.93 show ip bgp community-info
- 35.94 show ip bgp community-list
- 35.95 show ip bgp dampening
- 35.96 show ip bgp filter-list
- 35.97 show ip bgp inconsistent-as
- 35.98 show ip bgp neighbors
- 35.99 show ip bgp paths
- 35.101 show ip bgp quote-regexp
- 35.102 show ip bgp regexp
- 35.103 show ip bgp route-map
- 35.104 show ip bgp scan
- 35.105 show ip bgp summary
- 35.106 show ip bgp view
- 35.107 show ip bgp view neighbors
- 35.108 show ip bgp vpnv4
- 35.109 show ipv6 bgp redistribute
- 35.110 timers bgp
- Chapter 36 Commands for Black Hole Routing
- Chapter 37 Commands for ECMP
- Chapter 38 IPv4 Multicast Protocol
- 38.1 Public Commands for Multicast
- 38.2 Commands for PIM-DM
- 38.2.1 debug pim timer sat
- 38.2.2 debug pim timer srt
- 38.2.3 ip mroute
- 38.2.4 ip pim bsr-border
- 38.2.5 ip pim dense-mode
- 38.2.6 ip pim dr-priority
- 38.2.7 ip pim exclude-genid
- 38.2.8 ip pim hello-holdtime
- 38.2.10 ip pim multicast-routing
- 38.2.11 ip pim neighbor-filter
- 38.2.12 ip pim scope-border
- 38.2.13 ip pim state-refresh origination-interval
- 38.2.14 show ip pim interface
- 38.2.15 show ip pim mroute dense-mode
- 38.2.16 show ip pim neighbor
- 38.2.17 show ip pim nexthop
- 38.3 Commands for PIM-SM
- 38.3.1 clear ip pim bsr rp-set
- 38.3.2 debug pim event
- 38.3.3 debug pim mfc
- 38.3.4 debug pim mib
- 38.3.5 debug pim nexthop
- 38.3.6 debug pim nsm
- 38.3.7 debug pim packet
- 38.3.8 debug pim state
- 38.3.9 debug pim timer
- 38.3.10 ip mroute
- 38.3.11 ip pim accept-register
- 38.3.12 ip pim bsr-border
- 38.3.13 ip pim bsr-candidate
- 38.3.14 ip pim cisco-register-checksum
- 38.3.15 ip pim dr-priority
- 38.3.16 ip pim exclude-genid
- 38.3.17 ip pim hello-holdtime
- 38.3.18 ip pim hello-interval
- 38.3.19 ip pim ignore-rp-set-priority
- 38.3.20 ip pim jp-timer
- 38.3.21 ip pim multicast-routing
- 38.3.22 ip pim neighbor-filter
- 38.3.23 ip pim register-rate-limit
- 38.3.24 ip pim register-rp-reachability
- 38.3.25 ip pim register-source
- 38.3.26 ip pim register-suppression
- 38.3.27 ip pim rp-address
- 38.3.28 ip pim rp-candidate
- 38.3.29 ip pim rp-register-kat
- 38.3.30 ip pim scope-border
- 38.3.31 ip pim sparse-mode
- 38.3.32 show ip pim bsr-router
- 38.3.33 show ip pim interface
- 38.3.34 show ip pim mroute sparse-mode
- 38.3.35 show ip pim neighbor
- 38.3.36 show ip pim nexthop
- 38.3.37 show ip pim rp-hash
- 38.3.38 show ip pim rp mapping
- 38.4 Commands for MSDP Configuration
- 38.4.1 cache-sa-holdtime
- 38.4.2 cache-sa-maximum
- 38.4.3 cache-sa-state
- 38.4.4 clear msdp peer
- 38.4.5 clear msdp sa-cache
- 38.4.6 clear msdp statistics
- 38.4.7 connect-source
- 38.4.8 debug msdp all
- 38.4.9 debug msdp events
- 38.4.10 debug msdp filter
- 38.4.11 debug msdp fsm
- 38.4.12 debug msdp keepalive
- 38.4.13 debug msdp nsm
- 38.4.14 debug msdp packet
- 38.4.15 debug msdp peer
- 38.4.16 debug msdp timer
- 38.4.17 default-rpf-peer
- 38.4.18 description
- 38.4.19 exit-peer-mode
- 38.4.20 mesh-group
- 38.4.21 originating-rp
- 38.4.22 peer
- 38.4.23 redistribute
- 38.4.24 remote-as
- 38.4.26 sa-filter
- 38.4.28 sa-request-filter
- 38.4.29 show msdp global
- show msdp local-sa-cache
- 38.4.31 show msdp peer
- 38.4.32 show msdp sa-cache
- 38.4.33 show msdp sa-cache summary
- 38.4.34 show msdp statistics
- 38.4.35 show msdp summary
- shutdown
- 38.4.37 ttl-threshold
- 38.5 Commands for ANYCAST RP v4
- 38.6 Commands for PIM-SSM
- 38.7 Commands for DVMRP
- 38.7.1 debug dvmrp
- 38.7.2 ip dvmrp enable
- 38.7.3 ip dvmrp metric
- 38.7.4 ip dvmrp multicast-routing
- 38.7.5 ip dvmrp output-report-delay
- 38.7.6 ip dvmrp reject-non-pruners
- 38.7.7 ip dvmrp tunnel
- 38.7.8 show ip dvmrp
- 38.7.9 show ip dvmrp interface
- 38.7.10 show ip dvmrp neighbor
- 38.7.11 show ip dvmrp prune
- 38.7.12 show ip dvmrp route
- 38.8 Commands for DCSCM
- 38.8.1 access-list (Multicast Destination Control)
- 38.8.2 access-list (Multicast Source Control)
- 38.8.3 ip multicast destination-control access-group
- 38.8.4 ip multicast destination-control access-group (sip)
- 38.8.5 ip multicast destination-control access-group (vmac)
- 38.8.6 ip multicast policy
- 38.8.7 ip multicast source-control
- 38.8.8 ip multicast source-control access-group
- 38.8.9 multicast destination-control
- 38.8.10 show ip multicast destination-control
- 38.8.11 show ip multicast destination-control access-list
- 38.8.12 show ip multicast policy
- 38.8.13 show ip multicast source-control
- 38.8.14 show ip multicast source-control access-list
- 38.9 Commands for IGMP
- 38.9.1 clear ip igmp group
- 38.9.2 debug igmp event
- 38.9.4 ip igmp access-group
- 38.9.5 ip igmp immediate-leave
- 38.9.6 ip igmp join-group
- 38.9.7 ip igmp last-member-query-interval
- 38.9.8 ip igmp limit
- 38.9.9 ip igmp query-interval
- 38.9.10 ip igmp query-max-response-time
- 38.9.11 ip igmp query-timeout
- 38.9.12 ip igmp robust-variable
- 38.9.13 ip igmp static-group
- 38.9.15 show ip igmp groups
- 38.9.16 show ip igmp interface
- 38.10 Commands for IGMP Snooping
- 38.10.1 clear ip igmp snooping vlan
- 38.10.2 clear ip igmp snooping vlan <1-4094> mrouter-port
- 38.10.3 debug igmp snooping all/packet/event/timer/mfc
- 38.10.4 ip igmp snooping
- 38.10.5 ip igmp snooping vlan
- 38.10.6 ip igmp snooping vlan immediate-leave
- 38.10.7 ip igmp snooping vlan l2-general-querier
- 38.10.8 ip igmp snooping vlan l2-general-querier-source
- 38.10.9 ip igmp snooping vlan l2-general-querier-version
- 38.10.10 ip igmp snooping vlan limit
- 38.10.11 ip igmp snooping vlan mrouter-port interface
- 38.10.12 ip igmp snooping vlan mrpt
- 38.10.13 ip igmp snooping vlan query-interval
- 38.10.14 ip igmp snooping vlan query-mrsp
- 38.10.15 ip igmp snooping vlan query-robustness
- 38.10.16 ip igmp snooping vlan report source-address
- 38.10.17 ip igmp snooping vlan static-group
- 38.10.18 ip igmp snooping vlan suppression-query-time
- 38.10.19 show ip igmp snooping
- 38.11 Commands for IGMP Proxy
- 38.11.1 clear ip igmp proxy group
- 38.11.2 debug igmp proxy all
- 38.11.3 debug igmp proxy event
- 38.11.4 debug igmp proxy mfc
- 38.11.5 debug igmp proxy packet
- 38.11.6 debug igmp proxy timer
- 38.11.7 ip igmp proxy
- 38.11.8 ip igmp proxy aggregate
- 38.11.9 ip igmp proxy downstream
- 38.11.10 ip igmp proxy limit
- 38.11.11 ip igmp proxy multicast-source
- 38.11.12 ip igmp proxy unsolicited-report interval
- 38.11.13 ip igmp proxy unsolicited-report robustness
- 38.11.14 ip igmp proxy upstream
- 38.11.15 ip multicast ssm
- 38.11.16 ip pim bsr-border
- 38.11.17 show debugging igmp proxy
- 38.11.18 show ip igmp proxy
- 38.11.19 show ip igmp proxy mroute
- 38.11.20 show ip igmp proxy upstream groups
- Chapter 39 IPv6 Multicast Protocol
- 39.1 Public Commands for Multicast
- 39.2 Commands for PIM-DM6
- 39.2.1 debug ipv6 pim timer sat
- 39.2.2 debug ipv6 pim timer srt
- 39.2.3 ipv6 mroute
- 39.2.4 ipv6 pim bsr-border
- 39.2.5 ipv6 pim dense-mode
- 39.2.6 ipv6 pim dr-priority
- 39.2.7 ipv6 pim exclude-genid
- 39.2.8 ipv6 pim hello-holdtime
- 39.2.9 ipv6 pim hello-interval
- 39.2.10 ipv6 pim multicast-routing
- 39.2.11 ipv6 pim neighbor-filter
- 39.2.12 ipv6 pim scope-border
- 39.2.13 ipv6 pim state-refresh origination-interval
- 39.2.14 show ipv6 pim interface
- 39.2.15 show ipv6 pim mroute dense-mode
- 39.2.16 show ipv6 pim neighbor
- 39.2.17 show ipv6 pim nexthop
- 39.3 Commands for PIM-SM6
- 39.3.1 clear ipv6 pim bsr rp-set
- 39.3.2 debug ipv6 pim events
- 39.3.3 debug ipv6 pim mfc
- 39.3.4 debug ipv6 pim mib
- 39.3.5 debug ipv6 pim nexthop
- 39.3.6 debug ipv6 pim nsm
- 39.3.7 debug ipv6 pim packet
- 39.3.8 debug ipv6 pim state
- 39.3.9 debug ipv6 pim timer
- 39.3.10 ipv6 mroute
- 39.3.11 ipv6 pim accept-register
- 39.3.12 ipv6 pim bsr-border
- 39.3.13 ipv6 pim bsr-candidate
- 39.3.14 ipv6 pim cisco-register-checksum
- 39.3.15 ipv6 pim dr-priority
- 39.3.16 ipv6 pim exclude-genid
- 39.3.17 ipv6 pim hello-holdtime
- 39.3.18 ipv6 pim hello-interval
- 39.3.19 ipv6 pim ignore-rp-set-priority
- 39.3.20 ipv6 pim jp-timer
- 39.3.21 Command: ipv6 pim multicast-routing
- 39.3.22 ipv6 pim neighbor-filter
- 39.3.23 ipv6 pim register-rate-limit
- 39.3.24 ipv6 pim register-rp-reachability
- 39.3.25 ipv6 pim register-source
- 39.3.26 ipv6 pim register-suppression
- 39.3.27 ipv6 pim rp-address
- 39.3.28 ipv6 pim rp-candidate
- 39.3.29 ipv6 pim rp-register-kat
- 39.3.30 ipv6 pim scope-border
- 39.3.31 ipv6 pim sparse-mode
- 39.3.33 show ipv6 pim interface
- 39.3.34 show ipv6 pim mroute sparse-mode
- 39.3.35 show ipv6 pim neighbor
- 39.3.36 show ipv6 pim nexthop
- 39.3.37 show ipv6 pim rp-hash
- 39.3.38 show ipv6 pim rp mapping
- 39.4 Commands for ANYCAST RP v6
- 39.4.1 debug ipv6 pim anycast-rp
- 39.4.2 ipv6 pim anycast-rp
- 39.4.3 ipv6 pim anycast-rp
- 39.4.4 ipv6 pim anycast-rp self-rp-address
- 39.4.5 ipv6 pim rp-candidate
- 39.4.6 show debugging ipv6 pim
- 39.4.7 show ipv6 pim anycast-rp first-hop
- 39.4.8 show ipv6 pim anycast-rp non-first-hop
- 39.4.9 show ipv6 pim anycast-rp status
- 39.5 Commands for PIM-SSM6
- 39.6 Commands for IPv6 DCSCM
- 39.6.1 ipv6 access-list(ipv6 multicast source control)
- 39.6.2 ipv6 access-list(multicast destination control)
- 39.6.3 ipv6 multicast destination-control access-group
- 39.6.4 ipv6 multicast destination-control access-group (sip)
- 39.6.5 ipv6 multicast destination-control access-group (vmac)
- 39.6.6 ipv6 multicast policy
- 39.6.7 ipv6 multicast source-control
- 39.6.8 ipv6 multicast source-control access-group
- 39.6.9 multicast destination-control
- 39.6.10 show ipv6 multicast destination-control
- 39.6.11 show ipv6 multicast destination-control access-list
- 39.6.12 show ipv6 multicast policy
- 39.6.13 show ipv6 multicast source-control
- 39.6.14 show ipv6 multicast source-control access-list
- 39.7 Commands for MLD
- 39.7.1 clear ipv6 mld group
- 39.7.2 debug ipv6 mld events
- 39.7.4 ipv6 mld access-group
- 39.7.5 ipv6 mld immediate-leave
- 39.7.6 ipv6 mld join-group
- 39.7.7 ipv6 mld join-group mode source
- 39.7.8 ipv6 mld last-member-query-interval
- 39.7.9 ipv6 mld limit
- 39.7.10 ipv6 mld query-interval
- 39.7.11 ipv6 mld query-max-response-time
- 39.7.12 ipv6 mld query-timeout
- 39.7.14 ipv6 mld version
- 39.7.15 show ipv6 mld groups
- 39.7.16 show ipv6 mld interface
- 39.7.17 show ipv6 mld join-group
- 39.8 Commands for MLD Snooping Configuration
- 39.8.1 clear ipv6 mld snooping vlan
- 39.8.2 clear ipv6 mld snooping vlan <1-4094> mrouter-port
- 39.8.3 debug mld snooping all/packet/event/timer/mfc
- 39.8.4 ipv6 mld snooping
- 39.8.5 ipv6 mld snooping vlan
- 39.8.6 ipv6 mld snooping vlan immediate-leave
- 39.8.7 ipv6 mld snooping vlan l2-general-querier
- 39.8.8 ipv6 mld snooping vlan limit
- 39.8.9 ipv6 mld snooping vlan mrouter-port interface
- 39.8.10 ipv6 mld snooping vlan mrpt
- 39.8.11 ipv6 mld snooping vlan query-interval
- 39.8.12 ipv6 mld snooping vlan query-mrsp
- 39.8.13 ipv6 mld snooping vlan query-robustness
- 39.8.14 ipv6 mld snooping vlan static-group
- 39.8.15 ipv6 mld snooping vlan suppression-query-time
- 39.8.16 show ipv6 mld snooping
- Chapter 40 Commands for Multicast VLAN
- Chapter 41 Commands for ACL
- 41.1 absolute-periodic/periodic
- 41.2 absolute start
- 41.3 access-list (ip extended)
- 41.4 access-list (ip standard)
- 41.5 access-list(mac extended)
- 41.6 access-list(mac-ip extended)
- 41.7 access-list(mac standard)
- 41.8 clear access-group statistic interface
- 41.9 firewall
- 41.10 firewall default
- 41.11 ip access extended
- 41.12 ip access standard
- 41.13 ipv6 access-list
- 41.14 ipv6 access standard
- 41.15 ipv6 access extended
- 41.16 {ip|ipv6|mac|mac-ip} access-group
- 41.17 mac access extended
- 41.18 mac-ip access extended
- 41.19 permit | deny (ip extended)
- 41.20 permit | deny(ip standard)
- 41.21 permit | deny(ipv6 extended)
- 41.22 permit | deny(ipv6 standard)
- 41.23 permit | deny(mac extended)
- 41.24 permit | deny(mac-ip extended)
- 41.25 show access-lists
- 41.26 show access-group
- 41.27 show firewall
- 41.28 show ipv6 access-lists
- 41.29 show time-range
- 41.30 time-range
- Chapter 42 Commands for 802.1x
- 42.1 debug dot1x detail
- 42.2 debug dot1x error
- 42.3 debug dot1x fsm
- 42.4 debug dot1x packet
- 42.6 dot1x eapor enable
- 42.7 dot1x enable
- 42.8 dot1x ipv6 passthrough
- 42.9 dot1x guest-vlan
- 42.10 dot1x macfilter enable
- 42.11 dot1x max-req
- 42.12 dot1x user free-resource
- 42.13 dot1x max-user macbased
- 42.14 dot1x max-user userbased
- 42.16 dot1x port-method
- 42.17 dot1x privateclient enable
- 42.18 dot1x re-authenticate
- 42.19 dot1x re-authentication
- 42.20 dot1x timeout quiet-period
- 42.21 dot1x timeout re-authperiod
- 42.22 dot1x timeout tx-period
- 42.23 dot1x unicast enable
- 42.24 dot1x web authentication enable
- 42.25 dot1x web redirect
- 42.26 dot1x web redirect enable
- 42.27 show dot1x
- Chapter 43 Commands for the Number Limitation Function of Port, MAC in VLAN and IP
- 43.1 switchport mac-address dynamic maximum
- 43.2 vlan mac-address dynamic maximum
- 43.3 switchport arp dynamic maximum
- 43.4 switchport nd dynamic maximum
- 43.5 ip arp dynamic maximum
- 43.6 ipv6 nd dynamic maximum
- 43.7 mac-address query timeout
- 43.8 show mac-address dynamic count
- 43.9 show arp-dynamic count
- 43.10 show nd-dynamic count
- 43.11 debug switchport mac count
- 43.12 debug switchport arp count
- 43.13 debug switchport nd count
- 43.14 debug vlan mac count
- 43.15 debug ip arp count
- 43.16 debug ipv6 nd count
- Chapter 44 Commands for AM Configuration
- Chapter 45 Commands for Security Feature
- 45.1 dosattack-check srcip-equal-dstip enable
- 45.2 dosattack-check ipv4-first-fragment enable
- 45.3 dosattack-check tcp-flags enable
- 45.4 dosattack-check srcport-equal-dstport enable
- 45.5 dosattack-check tcp-fragment enable
- 45.6 dosattack-check tcp-segment
- 45.7 dosattack-check icmp-attacking enable
- 45.8 dosattack-check icmpv4-size
- 45.9 dosattack-check icmpv6-size
- Chapter 46 Commands for TACACS+
- Chapter 47 Commands for RADIUS
- 47.1 aaa enable
- 47.2 aaa-accounting enable
- 47.3 aaa-accounting update
- 47.4 debug aaa packet
- 47.5 debug aaa detail attribute
- 47.6 debug aaa detail connection
- 47.7 debug aaa detail event
- 47.8 debug aaa error
- 47.9 radius nas-ipv4
- 47.10 radius nas-ipv6
- 47.11 radius-server accounting host
- 47.12 radius-server authentication host
- 47.13 radius-server dead-time
- 47.14 radius-server key
- 47.15 radius-server retransmit
- 47.16 radius-server timeout
- 47.17 radius-server accounting-interim-update timeout
- 47.18 show aaa authenticated-user
- 47.19 show aaa authenticating-user
- 47.20 show aaa config
- 47.21 show radius count
- Chapter 48 Commands for SSL Configuration
- Chapter 49 Commands for IPv6 Security RA
- Chapter 50 Commands for VLAN-ACL
- Chapter 51 Commands for Mirroring Configuration
- Chapter 52 Commands for RSPAN Configuration
- Chapter 53 Commands for sFlow
- Chapter 54 Commands for VRRP
- Chapter 55 Commands for IPv6 VRRPv3 Configuration
- Chapter 56 Commands for MRPP
- Chapter 57 Commands for ULPP
- 57.1 clear ulpp flush counter interface
- 57.2 control vlan
- 57.3 debug ulpp error
- 57.4 debug ulpp event
- 57.5 debug ulpp flush content interface
- 57.6 debug ulpp flush {send | receive} interface
- 57.7 description
- 57.8 flush disable arp
- 57.9 flush disable mac
- 57.10 flush enable arp
- 57.11 flush enable mac
- 57.12 preemption delay
- 57.13 preemption mode
- 57.14 protect vlan-reference-instance
- 57.15 show ulpp flush counter interface
- 57.16 show ulpp flush-receive-port
- 57.17 show ulpp group
- 57.18 ulpp control vlan
- 57.19 ulpp flush disable arp
- 57.20 ulpp flush disable mac
- 57.21 ulpp flush enable arp
- 57.22 ulpp flush enable mac
- 57.23 ulpp group
- 57.24 ulpp group master
- 57.25 ulpp group slave
- Chapter 58 Commands for ULSM
- Chapter 59 Commands for SNTP
- Chapter 60 Commands for NTP
- 60.1 ntp enable
- 60.2 ntp server
- 60.3 ntp broadcast server count
- 60.4 ntp timezone
- 60.5 ntp access-group
- 60.6 ntp authenticate
- 60.7 ntp authentication-key
- 60.8 ntp trusted-key
- 60.9 ntp disable
- 60.10 ntp broadcast client
- 60.11 ntp multicast client
- 60.12 ntp ipv6 multicast client
- 60.13 debug ntp authentication
- 60.14 debug ntp packet
- 60.15 debug ntp adjust
- 60.16 debug ntp sync
- 60.17 debug ntp events
- 60.18 show ntp status
- 60.19 show ntp session
- Chapter 61 Commands for DNSv4/v6
- 61.1 clear dynamic-host
- 61.2 debug dns
- 61.3 dns-server
- 61.4 dns lookup
- 61.5 show dns name-server
- 61.6 show dns domain-list
- 61.7 show dns hosts
- 61.8 show dns config
- 61.9 show dns client
- 61.10 ip domain-lookup
- 61.11 ip domain-list
- 61.12 ip dns server
- 61.13 ip dns server queue maximum
- 61.14 ip dns server queue timeout
- Chapter 62 Commands for Show
- 62.1 clear logging
- 62.2 logging
- 62.3 ping
- 62.4 ping6
- 62.5 show debugging
- 62.6 show flash
- 62.7 show history
- 62.8 show logging buffered
- 62.9 show memory
- 62.10 show running-config
- 62.11 show startup-config
- 62.12 show switchport interface
- 62.13 show tcp
- 62.14 show telnet login
- 62.15 show temperature
- 62.16 show tech-support
- 62.17 show udp
- 62.18 show version
- 62.19 traceroute
- 62.20 traceroute6
- Chapter 63 Commands for Reload Switch after Specified Time
- Chapter 64 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU