PLANET XGS3-24040 - Manual

1 2
3 4
1-Port 10G XFP Optic Module
Quick Installation Guide
1. Overview
Thank you for purchasing PLANET XGS3-XFP 1-Port 10G
XFP Optic module. The XFP (10 Gigabit Small Form Factor
Pluggable) is a hot-swappable optical transceiver for 10
Gigabit per second. The XGS3 10G Ethernet module can
install into PLANET XGS3-24040 Switch witch supports up
to 2 10Gb fiber slots.
With optional 10G XFP fiber transceivers, the distance
can be extended from 300 meters (MTB-XSR, 10GBase-
SR, Multi-mode, 850nm), up to 10 kilometers (MTB-XLR,
10GBase-LR, Single-mode, 1310nm).
2. Checklist
Your XGS3-XFP box should contain the following items:
The XGS3-XFP module
This Installation Guide
If any item is missing or damaged, please consult the
dealer from whom you purchased your XGS3-XFP module.
n
n
3. Introduction
1-Port 10G XFP Optic Module
The following figure illustrates the front panel of XGS3-XFP
Module.
Figure 1 1-Port 10G XFP Optic Module Front View
Features:
Comply with the IEEE 802.3ae 10 Gigabit Ethernet
standard
1-Port XFP transceiver slot
Full-Duplex with support of Flow Control
Plug and Play Installation
LED indicators for LNK/ACT status
n
n
n
n
n
n
n
LED Definition XFP interface
The XGS3-XFP slide-in module includes its own integrated
LED indicators on the module’s front panel. The following
table describes the LEDs.
LED Color Function
LNK/ACT Green
On: indicate the 10Gbps link through
that port is successfully established.
Blink: indicate that the Switch is
actively sending or receiving data over
that port.
4. Installing Optional Modules
You can purchase optional modules separately to meet the
needs of your network.
Note
The XGS3-XFP module is hot-swappable during
operation; there is no need to power off the
Switch before slide or remove the module.
n