Document Outline

• 1. INTRODUCTION
  • 1.1 Package Contents
  • 1.2 Product Description
  • 1.3 How to Use This Manual
  • 1.4 Product Features
  • 1.5 Product Specifications
• 2. INSTALLATION
  • 2.1 Hardware Description
    • 2.1.1 Switch Front Panel
    • 2.1.2 LED Indications
    • 2.1.3 Switch Rear Panel
  • 2.2 Installing the Switch
    • 2.2.1 Desktop Installation
    • 2.2.2 Rack Mounting
    • 2.2.3 Installing the SFP transceiver
• 3. SWITCH MANAGEMENT
  • 3.1 Requirements
  • 3.2 Management Access Overview
  • 3.3 Web Management
  • 3.4 SNMP-Based Network Management
• 4. WEB CONFIGURATION
  • 4.1 Main Web Page
  • 4.2 System
    • 4.2.1 System Information
      • 4.2.1.1 System Summary
      • 4.2.1.2 Device Description
      • 4.2.1.3 System Time
      • 4.2.1.4 Daylight Saving Time
      • 4.2.1.5 System IP
    • 4.2.2 User Management
      • 4.2.2.1 User Table
      • 4.2.2.2 User Config
    • 4.2.3 System Tools
      • 4.2.3.1 Config Restore
      • 4.2.3.2 Config Backup
      • 4.2.3.3 Firmware Upgrade
      • 4.2.3.4 System Reboot
      • 4.2.3.5 System Reset
    • 4.2.4 Access Security
      • 4.2.4.1 Access Control
      • 4.2.4.2 SSL Config
      • 4.2.4.3 SSH Config
  • 4.3 Switching
    • 4.3.1 Port
      • 4.3.1.1 Port Config
      • 4.3.1.2 Port Mirror
      • 4.3.1.3 Port Security
      • 4.3.1.4 Port Isolation
      • 4.3.1.5 Loopback Detection
    • 4.3.2 LAG
      • 4.3.2.1 LAG Table
      • 4.3.2.2 Static LAG
      • 4.3.2.3 LACP Config
    • 4.3.3 Traffic Monitor
      • 4.3.3.1 Traffic Summary
      • 4.3.3.2 Traffic Statistics
    • 4.3.4 MAC Address
      • 4.3.4.1 Address Table
      • 4.3.4.2 Static Address
      • 4.3.4.3 Dynamic Address
      • 4.3.4.4 Filtering Address
    • 4.3.5 DHCP Filtering
  • 4.4 VLAN
    • 4.4.1 IEEE 802.1Q VLAN
    • 4.4.2 VLAN Config
    • 4.5.1 STP Config
      • 4.5.1.1 STP Config
      • 4.5.1.2 STP Summary
    • 4.5.2 Port Config
      • 4.5.2.1 Port Config
    • 4.5.3 MSTP Instance
      • 4.5.3.1 Region Config
      • 4.5.3.2 Instance Config
      • 4.5.3.3 Instance Port Config
    • 4.5.4 STP Security
      • 4.5.4.1 Port Protect
      • 4.5.4.2 TC Protect
  • 4.6 Multicast
    • 4.6.1 IGMP Snooping
      • 4.6.1.1 Snooping Config
      • 4.6.1.2 Port Config
      • 4.6.1.3 VLAN Config
      • 4.6.1.4 Multicast VLAN
    • 4.6.2 Multicast IP
      • 4.6.2.1 Multicast IP Table
      • 4.6.2.2 Static Multicast IP
    • 4.6.3 Multicast Filter
      • 4.6.3.1 IP-Range
      • 4.6.3.2 Port Filter
    • 4.6.4 Packet Statistics
      • 4.6.4.1 Packet Statistics
  • 4.7 QoS
    • 4.7.1 DiffServ
      • 4.7.1.1 Port Priority
      • 4.7.1.2 802.1P/CoS mapping
      • 4.7.1.3 DSCP Priority
      • 4.7.1.4 Schedule Mode
    • 4.7.2 Bandwidth Control
      • 4.7.2.1 Rate Limit
      • 4.7.2.2 Storm Control
    • 4.7.3 Voice VLAN
      • 4.7.3.1 Global Config
      • 4.7.3.2 Port Config
      • 4.7.3.3 OUI Config
  • 4.8 ACL
    • 4.8.1 ACL Config
      • 4.8.1.1 ACL Summary
      • 4.8.1.2 ACL Create
      • 4.8.1.3 MAC ACL
      • 4.8.1.4 Standard-IP ACL
      • 4.8.1.5 Extend-IP ACL
    • 4.8.2 Policy Config
      • 4.8.2.1 Policy Summary
      • 4.8.2.2 Policy Create
      • 4.8.2.3 Action Create
    • 4.8.3 Policy Binding
      • 4.8.3.1 Binding Table
      • 4.8.3.2 Port Binding
      • 4.8.3.3 VLAN Binding
  • 4.9 SNMP
    • 4.9.1 SNMP Config
      • 4.9.1.1 Global Config
      • 4.9.1.2 SNMP View
      • 4.9.1.3 SNMP Group
      • 4.9.1.4 SNMP User
      • 4.9.1.5 SNMP Community
    • 4.9.2 Notification
      • 4.9.2.1 Notification Config
    • 4.9.3 RMON
      • 4.9.3.1 History Control
      • 4.9.3.2 Event Config
      • 4.9.3.3 Alarm Config
  • 4.10 Maintenance
    • 4.10.1 System Monitor
      • 4.10.1.1 CPU Monitor
      • 4.10.1.2 Memory Monitor
    • 4.10.2 Log
      • 4.10.2.1 Log Table
      • 4.10.2.2 Local Log
      • 4.10.2.3 Remote Log
      • 4.10.2.4 Backup Log
    • 4.10.3 Device Diagnostics
      • 4.10.3.1 Cable Test
      • 4.10.3.2 Loopback
    • 4.10.4 Network Diagnostics
      • 4.10.4.1 Ping Test
      • 4.10.4.2 Tracert
  • 4.11 Save Config
  • 4.12 Logout
• 5. COMMAND LINE INTERFACE
  • 5.1 Accessing the CLI
  • 5.2 Telnet Login
• 6. COMMAND LINE MODE
  • 6.1 User EXEC Mode Commands
    • 6.1.1 broadcast command
    • 6.1.2 enable command
    • 6.1.3 logout command
    • 6.1.4 loopback Command
    • 6.1.5 ping command
    • 6.1.6 tracert command
    • 6.1.7 exit command
    • 6.1.8 history command
  • 6.2 Privileged Mode Commands
    • 6.2.1 broadcast command
    • 6.2.2 configure command
    • 6.2.3 copy command
    • 6.2.4 disable command
    • 6.2.5 firmware command
    • 6.2.6 logout command
    • 6.2.7 loopback Command
    • 6.2.8 ping command
    • 6.2.9 reboot command
    • 6.2.10 reset command
    • 6.2.11 tracert command
    • 6.2.12 Clear command
    • 6.2.13 exit command
    • 6.2.14 history command
    • 6.2.15 show command
  • 6.3 Global Config Mode Commands
    • 6.3.1 access-list Command
    • 6.3.2 Contact-info Command
    • 6.3.3 enable Command
    • 6.3.4 hostname Command
    • 6.3.5 interface Command
    • 6.3.6 ip Command
    • 6.3.7 lacp Command
    • 6.3.8 location Command
    • 6.3.9 logging Command
    • 6.3.10 loopback-detection Command
    • 6.3.11 mac Command
    • 6.3.12 monitor Command
    • 6.3.13 port-channel Command
    • 6.3.14 qos Command
    • 6.3.15 rmon Command
    • 6.3.16 snmp-server Command
    • 6.3.17 spanning tree Command
    • 6.3.18 system-time Command
    • 6.3.19 user Command
    • 6.3.20 vlan Command
    • 6.3.21 voice Command
    • 6.3.22 clear Command
    • 6.3.23 end Command
    • 6.3.24 exit Command
    • 6.3.25 history Command
    • 6.3.26 show Command
• 7. SWITCH OPERATION
  • 7.1 Address Table
  • 7.2 Learning
  • 7.3 Forwarding & Filtering
  • 7.4 Store-and-Forward
  • 7.5 Auto-Negotiation
• 8. TROUBLESHOOTING
• APPENDIX A
  • A.1 Switch's RJ45 Pin Assignments 1000Mbps, 1000Base-T
  • A.2 10/100Mbps, 10/100Base-TX
• EC Declaration of Conformity