3 logout command, 4 loopback command, 5 ping command – PLANET FGSW-2840 User Manual
Page 240: 6 tracert command, 7 exit command
User’s Manual of FGSW-2840 / FGSW-4840S
6.1.3 logout command
Description:
Logout the system
Syntax:
logout
6.1.4 loopback Command
Description:
The loopback interface command is used to test whether the port is available or not
Syntax:
loopback interface { fastEthernet port | gigabitEthernet port } { internal | external }
6.1.5 ping command
Description:
The ping command is used to test the connectivity between the Managed Switch and one node of the network
Syntax:
ping A.B.C.D - Destination IP address
6.1.6 tracert command
Description:
The tracert command is used to test the connectivity of the gateways during its journey from the source to destination of the
test data
Syntax:
tracert {ip-addr} [maxHops]
6.1.7 exit command
Description:
The exit command is used to return to the previous Mode from the current Mode
Syntax:
exit
240