Document Outline

• 1. Introduction
  • 1.1 Who Should Read This Manual
  • 1.2 Important Safety Information
• 2. Unpacking
• 3. Product Description
  • 3.1 General Description
  • 3.2 Models
• 4. FCO Type C Installation
  • 4.1 Fibre Channel Option (FCO) Type C Installation Considerations
    • 4.1.1 Operating Environment
    • 4.1.2 Ventilation
  • 4.2 FCO Type C Interconnect Cabling
  • 4.3 Cabling for TLS-42xx (using AIT-3 or 5 Tape Drives), TLS-44xx and TLS-46120 (using AIT-3 Tape Drives)
  • 4.4 Cabling for TLS-8000 and 88xxx Libraries
  • 4.5 Installing a Fibre Channel Option
    • 4.5.1 Installation
  • 4.6 Initializing the Fibre Channel Option
  • 4.7 Configuring the Fibre Channel Loop ID
  • 4.8 Configuring the Fibre Channel SCSI Devices Interface
• 5. FCO Type B Installation
  • 5.1 Fibre Channel Option (FCO) Type B Installation Considerations
    • 5.1.1 Operating Environment
    • 5.1.2 Ventilation
  • 5.2 FCO Type B Interconnect Cabling
  • 5.3 Cabling for TLS-44xxx Libraries with AIT-5 Tape Drives
  • 5.4 Cabling for TLS-46xxx Libraries with AIT-5 Tape Drives
  • 5.5 Cabling for TLS-412xxx Libraries with AIT-3 Tape Drives
  • 5.6 Cabling for TLS-412xxx Libraries with up to six AIT-5 Tape Drives
  • 5.7 Cabling for TLS-412xxx Libraries with up to twelve AIT-5 Tape Drives
  • 5.8 Securing the Cables to the TLS
  • 5.9 Initializing the Fibre Channel Option
  • 5.10 Configuring the Fibre Channel Loop ID
  • 5.11 Configuring the Fibre Channel SCSI Devices Interface
• 6. ATTO FCO Installation
  • 6.1 ATTO Fibre Channel Option (FCO) Installation Considerations
    • 6.1.1 Operating Environment
    • 6.1.2 Ventilation
  • 6.2 ATTO FCO Interconnect Cabling
  • 6.3 Cabling for TLS-44xxx Libraries with AIT-5 Tape Drives
  • 6.4 Cabling for TLS-46xxx Libraries with AIT-5 Tape Drives
  • 6.5 Cabling for TLS-412xxx Libraries with up to six AIT Tape Drives
  • 6.6 Cabling for TLS-412xxx Libraries with up to twelve AIT Tape Drives
• 7. The Configuration Menu
  • 7.1 Configuration Menu
  • 7.2 Configuration\Advanced
  • 7.3 Configuration\Advanced\Changer\Mechanics Menu
    • 7.3.1 Fibre Channel
    • 7.3.2 Fibre Channel Left
    • 7.3.3 Fibre Channel Right
  • 7.4 Configuration\Advanced\Fibre Channel (Left or Right) Menu
    • 7.4.1 Alarm
    • 7.4.2 Ch0 / Ch1 FC Speed (Fibre Channel Type B and C)
    • 7.4.3 Ch0..Ch5 SCSI ID (Fibre Channel Type B and C)
    • 7.4.4 Ch0..Ch5 SCSI Speed (Fibre Channel Type B and C)
    • 7.4.5 CLEAR LOG
    • 7.4.6 Router LUN
  • 7.5 Configuration\Advanced\Fibre Channel (Left or Right)\Set TimeMenu
    • 7.5.1 Date Day
    • 7.5.2 Date Month
    • 7.5.3 Date Year
    • 7.5.4 Time Hour
    • 7.5.5 Time Minute
    • 7.5.6 SET TIME
  • 7.6 Configuration\Fibre Channel Menu
    • 7.6.1 Id Mode (Left or Right)
    • 7.6.2 Loop Id (Left or Right)
    • 7.6.3 Topology 0 / Topology 1 (Left or Right)
  • 7.7 Configuration\Fibre Channel\Device (Left or Right) Menu
    • 7.7.1 RESCAN
  • 7.8 Configuration\Fibre Channel\Device (Left or Right) Menu
    • 7.8.1 SCSI Channel
    • 7.8.2 SCSI ID
    • 7.8.3 SCSI Lun
    • 7.8.4 Manuf
    • 7.8.5 Model
• 8. Maintenance Menu
  • 8.1 Maintenance Menu
  • 8.2 Maintenance\Fibre Channel Menu
  • 8.3 Maintenance\Fibre Channel\Info (Left or Right) Status Screen
    • 8.3.1 Backplane Id
    • 8.3.2 Base Lvl
    • 8.3.3 Board Rev
    • 8.3.4 CPLD Rev
    • 8.3.5 Memory (MB)
    • 8.3.6 Daughtr Bd Id
    • 8.3.7 FW Rev
    • 8.3.8 Loader Rev
    • 8.3.9 Prod. Id.
    • 8.3.10 S/N
    • 8.3.11 +2.5V (Type C FCO only)
    • 8.3.12 +3.3V
    • 8.3.13 +5V
    • 8.3.14 +12V (Type B and C FCOs only)
    • 8.3.15 Air Temp
    • 8.3.16 CPU Temp (Type B and C FCOs only)
    • 8.3.17 UPDATE
  • 8.4 Maintenance\Fibre Channel\ Log (Left or Right) Status Screen
• 9. Repacking
  • 9.1 Repacking the Fibre Channel Option
  • 9.2 Preparation for Packing Type C Fibre Channel Options
  • 9.3 Preparation for Packing Type B Fibre Channel Options
  • 9.4 Preparation for Packing ATTO Fibre Channel Options
  • 9.5 Packing the Fibre Channel Option