Document Outline

• Contents
• Precautions
  • CAUTION
    • I Installing
• Table of Contents
• Introducing the Sony TS/TW Series
  • 8
• Locating the Controls
  • T\WI0E0 button* ® ®
  • Locating the Controls
    • Installing the Glass Door and VCR Shelt (KV-27TW75 27TW76/32TW75/32TW76 only)
    • Push here to dose. To open, push again.
    • Push here to dose. To open, push again.
    • Check projection of this area of screw O.
    • Coated side
    • Align the grooves with O.
  • Locating the Controls
    • Installing Batteries
  • Presetting TV Channels
    • Use this feature to erase non-receiving channeis from the channei scan memory.
    • Press MENU to display the following screen.
    • Press the +1- button to select SET UP.
    • Press the button to select CHANNEL ERASE.
    • Press ENTER.
    • Press the CH h-/- button to select the channel you want to erase.
    • Press ENTER.
    • Repeat step 4 to erase other channels.
    • To return to TV mode
    • Press EXIT.
  • Presetting TV Channels
    • Use this feature to add channels one by one to the channel scan memory.
• 1-2
  • (FOLLOW STEPS 1 & 2 ON P. 16)
  • Press the +/- button to select CHANNEL ADD.
  • Press ENTER.
  • Press the 0 — 9 buttons to select the channel you want to add. For example, to add channel 25, press 2, 5 and ENTER.
  • Press ENTER again.
  • Repeat step 4 to add other channels.
  • To return to TV mode
    • Press EXIT.
  • To scan the preset channels* in numerical sequence
  • To select a channel directly
  • To turn off the TV
• Adjusting Picture and Sound Quaiity
  • Press the +!- button to make the adjustment.
  • Press ENTER.
  • Repeat steps 3 and 4.
  • 8
  • Adjusting Picture and Sound Quaiity
    • Press ENTER.
    • 8
      • To adjust another item
        • Repeat steps 3 and 4.
  • Adjusting Picture and Sound Quaiity
    • Receiving Multichannel TV Sound programs — MTS
• 1-2
  • (FOLLOW STEPS 1 AND 2 ON P. 22)
  • Select the MAIN mode to listen to STEREO sound.
  • Select the SAP mode to listen to Second Audio Programs. \(R)
  • Select the MONO mode to eliminate excessive noise during stereo broadcasts, caused by a weak incoming signal.
  • Press ENTER.
  • Turning the SPEAKER ON or OFF
    • Use this feature to turn the TV speakers off when you connect an audio system (p. 46)
    • (FOLLOW STEPS 1 and 2 ON P. 22)
    • Press the ■(■/- button and ENTER to select SPEAKER.
    • Press the +/- button to select ON or OFF modes alternately. (Display Is red).
    • 3
    • Press ENTER.
  • Scanning channels In the window picture
    • To make the window picture disappear
  • KV-27TW76, KV-32TW75 and KV-32TW76 only)
    • Swapping the main and window pictures — SWAP
      • Pre^s PIP to display a window picture.
      • Press SWAP.
    • Changing the position of the window picture — POSITION
      • Press PIP to display a window picture.
      • Press POSITION.
  • Using Picture-in-Picture
    • Displaying a VIDEO input Image as a window picture
    • Displaying pay cable TV as a window picture
    • a
    • a
      • Manufacturers and Code Numbers (VCR)
      • For your convenience
• Setting the CURRENT TIME
  • Set the current time before using the Timer-activated functions from the GUIDE menu (pp. 34 - 39).
  • Press MENU to display the following screen.
  • Press the +/- button to select SET UP.
  • Press ENTER.
  • Press ENTER.
  • Press the 0 — 9 buttons and ENTER to enter the current time. For example, to set the time at 3:15, press 0, 3,1, 5. (You must press 4 digits.)
  • Press ENTER.
  • Press the *!- button, to select AM or PM alternately.
  • Setting the ON/OFF TIMER
    • Set the time that you want the TIMER to start by pressing 0 — 9 (you must press 4 digits) and ENTER.
    • Set the duration of time that you want the TV to remain on, by pressing 1 - 9 and ENTER.
    • Set the channel that you want the TV to turn on to, by pressing 0 — < and ENTER.
  • Using the Timer-activated Functions — GUIDE
    • Setting CHANNEL BLOCK
      • Use this function to block a channel from appearing on the screen during the preset time, for instance, to prevent children from watching undesirable programs.
      • EXAMPLE: Set CHANNEL BLOCK at 8:45 PM, for one hour, on channel 38.
      • Press MENU to display the following screen.
      • Press the +!- button to select GUIDE.
      • ! ENTER.
      • Press the +/- buttons to select CHANNEL BLOCK.
      • Press ENTER.
      • Set the time that you want CHANNEL BLOCK to start by pressing 0 — 9 (you must press 4 digit) and ENTER.
      • Select AM or PM by pressing the +I- button, and press ENTER.
      • Set the duration of time that you want the TV to remain blocked (up to 9 hours), by pressing 1—9 and ENTER.
      • Set the channel that you want to block, by pressing 0 — 9 and ENTER.
  • Using the Timer-activated Functions ~ GUIDE
    • Setting the TIME DISPLAY
      • Press MENU to display the following screen. MENU
      • Press the +/- button to select GUIDE.
      • Press ENTER.
      • Press the +/- button and ENTER to select TIME DISPLAY.
      • Press the +/- button to select ON or OFF alternately. (Display is red)
      • Press ENTER.
• Using CHANNEL CAPTION
  • Captioning the channel display — CHANNEL CAPTION
    • Use this feature to caption up to 12 channel number displays with the matching channel call letters. For example, caption channel 20 with ESPN.
    • Press MENU to display the following screen.
    • Press the +1- button to select SET UP.
    • Press ENTER.
    • Press the +/- button to select CHANNEL CAPTION.
    • Press ENTER.
    • Enter a directory (CHANNEL GUIDE — see p. 42) number for the caption by pressing one of the directory keys. For example, to set caption number 4, press 4.
    • Select the channel you want to caption by pressing 0 — 9 and ENTER.
    • Select the first letter by pressing the +1- button and ENTER. Press to advance alphabetically; press - to go back.
    • Select each remaining letter by repeating step 6.
    • (For a 3-letter caption, leave a space by pressing ENTER only.)
    • To set the next caption, press ENTER again, and repeat the steps from step 4.
    • Viewing the captioned channeis — CHANNEL GUiDE
    • To cancel the CHANNEL GUIDE screen
  • Connecting Vídeo Equipment
    • Connecting Camcorders
    • Listening to TV or connected VCR sound through an audio system
    • Preparing for operation
    • Adjusting the sound ievei
    • Television system Channel coverage
    • Picture tube
    • Antenna
    • Input
    • Output
    • 27- inch picture measured diagonally
    • 32-inch picture measured diagonally
    • Supplied accessories
• Troubleshooting