Sony KV-32TS35 - Manual (Page 9)

Installing the Glass Door and VCR Shelt (KV-27TW75 27TW76/32TW75/32TW76 only)
KV-32TW75
KV-32TW76
Push here to dose.
To open, push again.
Parts list ® ®
o Bushing 1 2
o
Bottom Hinge i* » 1
1 2
o Top Hinge 1 2
o
S c r e w 4 x 4 4 8
o Metal tube
a )
4
-
o Plate pad
i j
1 2
o Push plate 1 1 1 2
KV-27TW75
KV-27TW76
(D
a.
Push here to dose.
To open, push again.
4 Insert bushing O into the cabinet
hole. Check that the projection of
the screw through the hinge allows for
proper installation of the hinge to the
glass, then insert the bottom hinge O
into the bushing.
O Insert the metal tube shelf
^ supports O and, aligning the
grooves with the supports, insert the
shelf.
(KV-32TW7WKV-32TW76 only)
3 Attach the top hinge® to one
end of the glass door and tighten
the screws. Attach plate pad® to the
other end, then push plate ® over the
plate pad.
^ Pushing the glass door hinge up
into the hole located on the cabinet
oeling, side the door Mo the bottom
hinge; then tighten the screws.
(Install the second door to the other side
in the same way as above, for models
KV-277W75 andKV-27IW76.)
Check projection of this
area of screw O.
Coated side
Align the grooves with O.
Preface