Sony KV-32TS35 - Manual (Page 45)

Connecting video equipment not equipped with an S video output jack
Rear of TV {KV-27TS27 also)
SVIOEO» ^
MOO OUT
3SBÊÊË.
: Signal flow
to VHF/UHF
to VIDEO (yellow)
to AUDIO-L (white)
VMC-820S (not supplied)
to AUDiaR (red)
to audio output
to video output
VHF/
UHF
output
VCR
Preparing for use
1
Turn on the TV.
2
Press the TVA/IDEO button on the TV or on the
Remote Commander so that “VIDEO” (for equipment
connected to VIDEO IN) or “S VIDEO” (for equipment
connected to S VIDEO IN) appears on the screen.
When you cannot obtain a clear picture and/or sound
Make sure that the TV/VTR mode select control on the
VCR is set to TV. Reselect the channel you want to view
with the controls on the TV or the Remote Commander.
Operating your equipment
(except for KV-27TS27 and KV-32TS20)________________________
When using a Sony or other manufacturer’s infrared
remote control VCR or a Sony multi-disc player, you can
operate most of the equipment using the supplied pre­
programmed Renrote Commander
(pp.30-31.)
To return to TV mode
Press the TV/VIDEO button on the TV or Remote
Commander so that a channel number appears on the
screen.
IwiMriV
Mâ-
Note
Connect one video equipment to the VIDEO IN jack on
either the front or rear panel. If you connect equipment to
both Jacks and turn them both on at once, the TV’s main
and window pictures will be distorted.
S
S
Chapter 4: Other Conrrections 45