Humax VA-FOX T - Manual (Page 42)

**
1. TV-SCART/VCR-SCART
You can set TV/VCR-SCART Output.
1. Select TV-SCART or VCR-SCART button, and press the OK or button.
2. Select one option using the button, and press the OK or button.
2. Audio Output
Set the Audio Output.
1. Select Audio Output button, and press the OK or button.
2. Select one option form Stereo or Mono using the button.
3. Audio Output Format
You can select the priority of audio.
1. Select Audio Output Format using the button.
2. Press the OK or button to display the PCM or Dolby Digital option.
3. Select your desired option and press the OK button.
PCM Set when connecting to an audio system without a Dolby Digital, DTS, or other
special decoder.
Dolby Digital You can listen sound in Dolby Digital mode. However, if you select Dolby Digital,
you cannot change the audio language.
4. Screen Ratio
You can set the aspect ratio of your TV.
1. Select Screen Ratio button, and press the OK or button.
2. Select one option from 4:3 or 16:9 using the button, and press the OK button.
Note: If 2 options are provided, you can switch the option at a time using the OK button.
Namely, Whenever you press the OK button, Screen Ratio is switched between 4:3 and
16:9.
5. Display Format
You can select the Display Format according to TV Screen Ratio.
1. Select Display Format using the button, and press the OK or button.
2. If the Screen Ratio is set to 4:3, you can select one from Auto/Letter box/Center Mode using
the
button, and press the OK button.
3. If the Screen Ratio is set to 16:9, you can select one from Auto/Pillar box/Full mode using
the
button, and press the OK button.
**
**
GB 41
**
**
**
**
**
**
**
**
**
**
**
**
**
**