Humax VA-FOX T - Manual (Page 47)

**
8.3 Default Setting
Default Setting restores the receiver to the default settings.
Warning: Please note that once you perform Default Setting, all data such as Channel List, and
User Configured data are deleted.
To perform Factory Default:
1. Press the MENU button.
2. Select Installation using the button, and press the
OK or button.
3. Enter Password using the NUMERICAL (0-9) button.
4. Select Default Setting using the button, press the
OK or button.
5. Select Yes and press the OK button to restore all
setting to Factory Default.
Select No and press the OK
or BACK button to
return to the previous menu.
6. Confirm again to start loading default setting. Enter
Password using the NUMERICAL (0-9) button to perform
restoring.
7. When completing the default setting, press the OK
button to automatically run the Installation Wizard.
When default setting is completed, Installation Wizard is
automatically displayed, which helps Channel Search. For
detailed information about Installation Wizard, refer to 3.
Installation Wizard.
**
8. Installation
GB 46
**
**
**
**
**
**
**
**
**
**
**
**
**
**