Humax VA-FOX T - Manual (Page 50)

**
**
2. If updating software from Menu
1. Press the MENU button.
2. Select Installation using the button, and press the
OK or button.
3. Enter Password using the NUMERICAL (0-9) buttons.
4. Select Software Update using the button, and press
the OK or button.
**
3. If new version of software is detected during watching a programme
1. A message will be displayed to notify that new software is
found.
2. Select YesOff. and press the OK button to start
upgrading. Select No and press the OK button to
return to the previous menu.
Select Later and press the OK
button to update later.
That means the update menu display as soon as you turn
on the receiver next time.
**
4. If using Automatic Update
You can set the product to find HUMAX software update site and update software automatically.
1. Select Automatic from Software Update Menu screen
using the
button, and press the OK or button.
2. Automatically search for new software. Select Stop and
press the OK
button to finish Search.
3. When detecting update software, the following result is
displayed. If new software is not found by Automatic, use
Manual Update.
**
**
GB 49
**
**
**
**
**
**
**
**
**
**
**
**
**
**