Humax VA-FOX T - Manual (Page 55)

**
You can manipulate TV using the remote control provided by Humax.
Note: This function may not be supported depending on TV model.
TV code setting
Note: While you are setting TV code, please keep pressing TV button.
1. Point remote control towards the remote control receiving parts of TV.
2. Press the TV button, and the TV button LED blinks once.
Keep pressing TV button for 3 seconds, then TV button LED turn on.
Press three numbers of TV code using the NUMERICAL (0~9) button orderly.
Refer to the following Code for TV manufacturer.
3. TV button LED blink twice when you detach your finger from the TV button.
4. TV power turns on or off when the setting is completed.
**
[Code for TV manufacturer] Table
**
**
12. Manipulating your TV using Remote Control
GB 54
**
**
**
**
**
**
**
**
**
**
**
**
**
**