Document Outline

• INTRODUCTION
  • Underwriter's Laboratories (UL) Listing
• OVERALL DESCRIPTION
  • Console Operation
  • Normal Top-Level Display
  • Display Menus
    • Main Menu
    • Error Beeps
    • Trouble Beeps
    • Confirmation Beep
    • Cancel
    • Time Out
  • Areas
  • OmniPro II Maintenance
• SECURITY SYSTEM OPERATION
  • Disarming the Security System and Silencing Alarms
  • Arming the Security System
  • Using Shortcut Keys
  • Quick Arm
  • Bypassing Zones
    • Auto-Bypass
  • Restoring Zones
    • #=GOTO
  • What To Do When You Come Home
  • What Happens When the Alarm is Activated
    • Burglar Alarm Activated
    • Fire Alarm Activated
    • Gas Alarm Activated
  • Emergency Keys
    • Police Emergency
    • Fire Emergency
    • Auxiliary Emergency
  • Duress Code Entered or Duress Alarm Activated
  • Alarm Reset
  • Alarm Cancel
  • Trouble Indications
  • Codes
    • Master Code
    • Manager Code
    • User Code
  • Duress Code
  • Panic Switches
  • Area Arming
  • GOTO Area
  • Testing Your System
• CONTROL
  • Control Commands
  • ALC Switch Modules
    • ALC Module Types
  • X-10 Modules
    • House Codes
    • Unit Numbers
  • Scrolling Through Names
  • Controlling Units
    • Dimming and Brightening
    • Lighting Level
    • Ramp Command
    • Scene Command (Compose)
  • Timed Commands
  • Status of a Unit
  • Internal Flags
  • Controlling Outputs
  • All On / Off
    • All Lights On
    • All Off
  • Leviton Scene Control
    • Scene
      • Scene Commands
      • Scene Set Command
      • Scene On Command
      • Scene Off Command
  • Buttons
  • Temperature Control
  • HAI RC-Series Thermostats
  • Programmable Energy Saver Modules (PESMs)
    • Freeze Alarms
    • Outdoor Temperature
    • Temperature Control of Appliances
  • Temperature Alarms
  • Humidity
  • Status
  • Event Log
    • Show Events
  • Messages
    • Record Memo Message
    • Play Memo Message
    • Clear Text Messages
    • Message
      • Show Message
      • Log Message
      • Clear Message
      • Say Message
      • Phone Message
      • Send Message (Pro-Link)
• TELEPHONE CONTROL
  • Telephone Interface
  • In-House Phones
  • Remote Phones
  • Phone Access Denied - Remote Lockout
  • Alternate Method
  • Main Menu
  • 1 - Control
  • 2 - Security
    • GOTO Area
  • 3 - Button
  • 4 - All
  • 5 - Temperature
  • 6 - Status
  • 7 - Events
  • 8 - Message
    • Playing and Recording a Message
    • Paging and Listening
    • Playing and Recording a Custom Phrase
    • Playing and Recording the Address
  • 9 - Good-Bye
  • Panic Button over the Phone (# # # # # #)
  • Emergency Dial-Out
  • Digital Dialer
  • Voice Dialer
    • How the OmniPro II Voice Dialer Works
    • What the OmniPro II Voice Dialer Does
    • What You Hear - If Your OmniPro II Calls You
    • Entering the Code
  • PC Access
  • Built-In Ethernet Port
  • Controller IP Address, Port Number, and Encryption Key
  • OmniPro II Ethernet Connections
  • Connecting to Network via PC Access
  • Dynamic DNS
• SETUP
  • Configuration and Advanced Control Programming (ACP)
  • Set Up Codes
    • Authority Level
    • 1 = Master
    • 2 = Manager
    • 3 = User
    • Access Areas
    • Duress Code
  • Set Up Time
  • Advanced Control Programming (ACP)
    • 1 = Add Programs
    • 2 = Show Programs
    • 3 = Delete All Programs
  • Edit Programs
  • Edit Programs When
    • Times Programs
    • Button and Event Programs
      • Control Unit Event / ALC Switch Press Event Buttons
      • Security Mode Event Buttons
      • Zone Event Buttons
      • All On/Off Event Buttons
      • Alarm Event Buttons
      • X-10 Event Buttons
      • Miscellaneous Event Buttons
      • Message Event Buttons (Pro-Link)
  • Edit Program Command
    • Program Control Commands
    • Program Security Commands
    • Program Button Commands
    • Program All On / All Off Commands
    • Program Temperature Commands
    • Program Energy Cost
    • Program Message Commands
  • Edit Program Condition
    • Program Control Conditions
    • Program Security Mode Conditions
    • Program Zone Conditions
    • Program Time Clock Conditions
    • Program Other Conditions
  • Set Up Dial
    • Telephone Access
    • Answer Outside Call
    • Remote Commands
    • Rings Before Answer
    • Dial Type
    • My Phone Number
    • Dial Out Number 1
    • Dial Out Numbers 2-8
    • Dial Order
  • Set Up Arming
    • Entry Delay
    • Exit Delay
    • Audible Exit Delay
    • Entry/Exit Chime
    • Perimeter Chime
    • Enable Quick Arm
    • Enable Auto Bypass
    • All On For Alarm
    • Beep On Trouble
  • Set up Miscellaneous
    • High Security Mode
    • Announce Alarms
    • Enable Freeze Alarm
    • Flash For Alarm
    • X-10 House Code 1 Format
    • X-10 House Codes 2-16 Format
    • House Code 1 X-10 All Off
    • House Code 1 X-10 All On
    • House Codes 2-16 X-10 All Off
    • House Codes 2-16 X-10 All On
    • Time Clocks
    • Latitude, Longitude, and Time Zone
    • Daylight Savings
    • Controller IP Address
    • Controller Port Number
    • Encryption Key
  • Set Up Names
  • Set Up Voice
  • Set Up Address
• UNDERWRITER'S LABORATORIES REQUIREMENTS
  • FIRE ESCAPE PLANNING
• FEDERAL COMMUNICATION COMMISSION NOTICE:
• CANADIAN INDUSTRY CANADA NOTICE
• APPENDIX A - DIAL OUT PLANNER
  • INSTRUCTIONS TO CALLED PARTY
• APPENDIX B - TEXT DESCRIPTION CHARACTER CODES
• APPENDIX C - VOICE DESCRIPTION CODES
  • NOTES ON CUSTOM PHRASES