Hitachi VT-FX631A-VT - Manual (Page 30)

30
Remote Control Illustration.
9 Press the GUIDE button to end this setting.
The cable box output channel has now been set. However, the VCR does not control your cable box. Turn
on the cable box and leave it tuned to the channel you want to record before the recording is scheduled
to begin.
Note: If you make a mistake when entering digits, press the CLEAR button repeatedly to return the white dash "-"
to the digit to be corrected. Then, punch in the correct number.
PLAYBACK
To playback a recorded tape
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Insert a recorded tape.
The power comes on automatically and the tape indicator lights on the display.
• When a cassette without its safety tab is inserted, playback starts automatically.
3 Press the PLAY button to start playing the tape.