Set the prompt delay time, Restore the factory defaults, Self-maintenance sounds – HP 2600/2700 User Manual

Page 171

Advertising
background image

HP all-in-one has not been used within that specified period, it turns the light bulb off to
preserve power. You can exit this mode by pressing any button on the control panel.
Your HP all-in-one is automatically set to enter power save mode after 12 hours. Follow
these steps if you want the HP all-in-one to enter this mode earlier.
1

Press

Setup

.

2

Press

7

, then press

2

.

This displays the

Preferences

menu and then selects

Set Power Save Mode

Time

.

3

Press to select the appropriate time, then press

OK

.

You can choose 1, 4, 8, or 12 hours for the power save time.

Set the prompt delay time

The

Prompt Delay Time

option allows you to control the amount of time that passes

before a message prompts you to take further action. For example, if you press

Copy

and the prompt delay time passes without you pressing another button, the message
"

Press START to copy. Press Number or OK to select.

" appears in the color

graphics display. You can choose

Fast

,

Normal

,

Slow

, or

Off

. If you select

Off

, hints

will not appear on the color graphics display but other messages, such as low ink
warnings and error messages, will still appear.
1

Press

Setup

.

2

Press

7

, then press

3

.

This displays the

Preferences

menu and then selects

Set Prompt Delay Time

.

3

Press to select a delay time, then press

OK

.

Restore the factory defaults

You can restore the original factory settings to what they were when you purchased
your HP all-in-one.

Note

Restoring the factory defaults will not change the date information you set, nor
will it affect any changes you made to scan settings and the language and
country/region settings.

You can perform this process from the control panel only.
1

Press

Setup

.

2

Press

6

, then press

3

.

This displays the

Tools

menu and then selects

Restore Factory Defaults

.

The factory default settings are restored.

Self-maintenance sounds

The HP all-in-one might make noises after long periods (approximately 2 weeks) of
inactivity. This is normal operation and is necessary to ensure the HP all-in-one
produces the best quality printouts.

Chapter 15

168

HP Photosmart 2600/2700 series all-in-one

Maintain your

HP

all-in-one

Advertising
This manual is related to the following products: