HP 2600/2700 - Manual (Page 24)

3 Connection information
Your HP all-in-one comes equipped with networking capability. It also comes equipped
with a USB port so you can connect directly to a computer using a USB cable. If you
insert an HP bt300 Bluetooth® Wireless Printer Adapter into the PictBridge camera port
(USB host port) on the front of your HP all-in-one, Bluetooth devices such as PDAs and
camera phones can print to your HP all-in-one.
Supported connection types
Description Recommended
number of
connected
computers for best
performance Supported software
features Setup instructions
USB connection One computer
connected by means
of a USB cable to the
device. All features are
supported. Follow the Setup
Guide for detailed
instructions.
Ethernet (wired)
connection Up to five computers
connected by means
of a hub or router. All features are
supported, including
Webscan. Follow the Setup and
Network Guides for
detailed instructions.
802.11b or g
(wireless) connection
(HP Photosmart 2700
series all-in-one only) Up to five computers
connected by means
of an access point.
(infrastructure mode) All features are
supported, including
Webscan. Follow the Setup and
Network Guides for
detailed instructions.
HP bt300 Bluetooth®
Wireless Printer
Adapter (HP bt300) Not applicable. Printing. Follow the instructions
in
Connect using the
HP bt300 Bluetooth
Wireless Printer
Adapter
.
Connect using a USB cable
Detailed instructions for connecting a computer to your HP all-in-one using a USB cable
are included in the Setup Guide that came with your device.
Connect using Ethernet
The HP Photosmart 2600/2700 series all-in-one supports both 10 Mbps and 100 Mbps
Ethernet network connections. Detailed instructions on connecting your HP all-in-one to
an Ethernet (wired) network are included in the Setup and Network Guides that came
with your device.
User Guide 21
Connection information