HP 2600/2700 - Manual (Page 64)

Paper type Control panel setting
HP Iron-On Transfer (for color fabrics) Iron-On
HP Iron-On Transfer (for light or white fabrics) Iron-On Mirrored
HP Premium Paper Premium Inkjet
Other inkjet paper Premium Inkjet
HP Professional Brochure & Flyer Paper (Glossy) Brochure Glossy
HP Professional Brochure & Flyer Paper (Matte) Brochure Matte
HP Premium or Premium Plus Inkjet
Transparency Film Transparency
Other transparency film Transparency
Plain Hagaki Plain Paper
Glossy Hagaki Premium photo
L (Japan only) Premium Photo
Increase copy speed or quality
The HP all-in-one provides three options that affect copy speed and quality.
●
Normal delivers high-quality output and is the recommended setting for most of
your copying. Normal copies faster than Best .
● Best produces the highest quality for all paper and eliminates the banding
(striping) effect that sometimes occurs in solid areas. Best copies more slowly than
the other quality settings.
● Fast copies faster than the Normal setting. The text is comparable to the quality of
the Normal setting, but the graphics might be lower quality. The Fast setting uses
less ink and extends the life of your print cartridges.
1 Make sure you have paper loaded in the input tray.
2 Load your original face down on the right front corner of the glass.
3 Press Copy , and then press 6 .
This displays the Copy Menu and then selects Copy Quality .
4 Press to highlight a quality setting, and then press OK .
5 Press Start Copy Black or Start Copy Color .
Select an input tray
If your HP all-in-one has more than one input tray, you can use the control panel to
specify which input tray to use.
1
Press Copy , and then press 3 .
This displays the Copy Menu and then selects Tray Select .
2 Press to highlight an input tray.
3 Press OK to choose the highlighted paper tray.
(continued)
User Guide 61
Use
the
copy
features