HP 2600 - Manual (Page 392)

Troubleshooting
Diagnostic Tools
CLI Administrative and Troubleshooting Commands
These commands provide information or perform actions that you may find
helpful in troubleshooting operating problems with the switch.
N o t e For more on the CLI, refer to “Using the Command Line Interface (CLI)” on
page 4-1.
Syntax: show version
Shows the software version currently running on the
switch,
and the flash image from which the switch booted (primary
or secondary).
show boot-history
Displays the switch shutdown history.
show history
Displays the current command history.
[no] page
Toggles the paging mode for display commands between
continuous listing and per-page listing.
setup
Displays the Switch Setup screen from the menu interface.
repeat
Repeatedly executes the previous command until a key is
pressed.
kill
Terminates all other active sessions.
C-42