Hague Quality Water Intl WATERMAX 60 SERIES - Manual (Page 15)

WaterMax 60 Series Owner’s Manual 11/10/2008 15
Service Settings
To program Service settings on the 60 Series controller, press and hold the Service Settings button while
“Service Settings” is displayed until “Set Language English” is displayed. The Next function becomes active on
the Customer Settings/Next button. Use the Next button to step through parameters that can be set.
Programming Service Settings is similar to programming Customer Settings (see
Customer Settings for
programming details). The values that can be set are listed below. (Metric values are in parentheses.)
Note: The Service Settings must be set before the Customer Settings.
Display Meaning Possible Values Comments
Set Language English Set the language of the display Set Language English
Entrer Langue Francais
Entre La Lengua Español
Sprache Entr. Deutsch
Ambienti Lingua Italiano
Units
English Units of measure English
Metric
Show
History
Yes
Enables entry to the history file or
bypass of the history file Yes
No Enter history file
Bypass history file
Soft. v. # 2.04
(Hist) Displays the current software
version Cannot be set Displays only when History
is set to Yes
Install
Date (Hist)
000000 Installation date of the appliance
(MMDDYY)
000000 to 999999
Displays only when History
is set to Yes
Number of
People (Hist)
000 Record of the number of people in
the household 000 to 999
(should match Customer
Settings) Displays only when History
is set to Yes
Hardness
Grains
Iron
ppm
Manganese
ppm
Chlorine
ppm
Sulfur
ppm
pH
Iron
Bacteria
(Hist)
000
(Hist)
000
(Hist)
000
(Hist)
000
(Hist)
000
(Hist)
00.0
(Hist)
Yes Record of tested water
characteristics
000 to 999 ppm (mg/L)
000 to 999 ppm (mg/L)
000 to 999 ppm (mg/L)
000 to 999 ppm (mg/L)
000 to 999 ppm (mg/L)
00.0 to 99.9
Yes or No
Display only when History
is set to Yes
Total
Regens (Hist)
00000 Total number of regenerations the
appliance has gone through Cannot be reset
00000–99999 Displays only when History
is set to Yes
Total
Gallons (Hist)
00000000 Total amount of water that has
passed through the appliance Cannot be reset
00000000–99999999 Displays only when History
is set to Yes
Model
Number (Hist)
00AAA Model number of the appliance 00AAA to 99ZZZ Displays only when History
is set to Yes
Save
History
Yes
Saves history values Yes
No Displays only when History
is set to Yes