Safety tips for operation, Features – Hyundai HACM12DB - HCCM22DB User Manual

Page 2

Advertising
background image

ECR International

Hyundai Ductless Split System

2

!

WARNING

!

Do not place animals, plants, or combustible equipment

in the path of the unit air flow.

Do not touch the unit(s) with wet hands.

Do not put anything in the air inlet(s) or outlet(s) especially

on the outdoor (condenser) unit. Children are particularly
liable to this danger. The fan is running at high speed
inside. Covering the units or blocking them will cause the
deterioration of air conditioner performance or cause mal-
function.

Do not apply excessive force to terminal connections.

Connect the air conditioner(s) to a (dedicated) electrical

circuit.

In the event of lightning, stop the air conditioner(s) and

disconnect the power source.

Do not touch the heat exchanger, pipes and valves on the

outdoor unit during cooling cycle. You may get burned.

The fuse or the circuit breaker must comply with national

and local codes.

Do not modify the system(s). It may increase the risk of

fire.

SAFETY TIPS FOR OPERATION

!

CAUTION

!

MELODY BUZZER

When selecting ON/OFF and function changes, a melody will
sound from the indoor unit(s) to indicate that the change has
occurred.

DEODORIZING FUNCTION

In case of DRY and COOL mode, the fan or indoor unit(s) will
not turn ON for 40 seconds even after starting the operation in
order to deodorize various smells emitting from the inside of
indoor unit.

Never expose infants, handicapped persons, or seniors

directly to the airflow. Adjust the room temperature and
the airflow direction.

Make sure that the indoor and outdoor unit(s) are installed

out of the reach of children.

Do not use the air conditioner(s) for preservation of food-

stuffs, animals, plants, precision appliances, arts and
medicine.

Do not sit on or place objects on the unit(s).

• Use ASHRAE or MANUAL -J to calculate the cooling load.

The current temperature indicated on the remote control(s)

can be different from the actual temperature of the room.

Any function indicated by a * is limited to heating model

only.

FEATURES

Advertising