Operation, Heat mode, Continued) fan speed, air flow direction – Hyundai HACM12DB - HCCM22DB User Manual

Page 6: Circulation mode

Advertising
background image

ECR International

Hyundai Ductless Split System

6

HEAT MODE

(Except Cool model)

„

„

„

„

„ Heating Capability:
~
This is a Heat pump type air conditioner which is heating

the room by absorbing the outside air to the room. There-
fore, as outside temperature drops, heating capability may
be reduced.

~ If heating is not enough, please use another heating source

together with the unit(s).

• This is a warm air circulating system for heating the room.

Therefore it will take time to heat the whole room.

„

„

„

„

„ Features of Heating Operation:

~ If there is frost on the outdoor unit, the heating capacity

will drop. Therefore, defrosting operates automatically
(approx. 5 to 12 minutes) and the indicator light on the
indoor unit(s) will blink (red).

~ The room and outdoor fan does operate during defrosting

and the unit will not run during this time.

• In case of Cool and Dry mode, water may drop according

to the contaminating status of air filter. In this case, please
clean or replace the air filter with a new one.

OPERATION

(Continued)

FAN SPEED, AIR FLOW DIRECTION

• To operate the unit(s) effectively, it is recommended that

you familiarize yourself with the following functions:

• To change the fan speed
Press the FAN SPEED button.

• Cold air moves down, horizontal air flow is preferred when

cooling.

• To change the air flow Up or Down
Press the Flap

button.

• Up/Down Moving

range of Airflow
Direction Control
Plate.

• Left-right airflow direction is adjusted manually.

• As shown in the figure below adjust the left-right airflow

direction with the right/left air flow control plate.

CIRCULATION MODE

• If CIRCULATION mode is selected, the room air is circu-

lated so that the temperature stratification in the room will
be reduced.

• You can select AUTO, HIGH, MED, or LOW speed.

• In the AUTO fan speed, the room temperature, set tem-

perature and the unit temperature are monitored so that
the circulation can be properly controlled.

• Up/Down Air Flow

Control Plate

• Right/Left Air Flow

Control Plate

!

CAUTION

!

Advertising