Operation, Continued), High power mode – Hyundai HACM12DB - HCCM22DB User Manual

Page 7: Operation condition, Timer mode (on, off)

Advertising
background image

ECR International

Hyundai Ductless Split System

7

mark will blink

mark will blink

OPERATION

(Continued)

(Example)
Time is AM 10:20. Air-conditioner is not in operation.
How to start the air conditioner at PM 1:30 and stop it at
PM 6:30.

1. Press the

button.

ON-TIMER

button or OFF-TIMER button.

2. Press button to adjust ON TIMER to PM 1:30 (Time

can be adjusted at hour intervals by pressing and holding

button. Time can also be adjusted by 10-minute

intervals by pressing button at center interval.

3. Press the TIMER button.

4. Press the

button.

5. Press button to adjust OFF TIMER to PM 6:30

Time can be adjusted at hour intervals by pressing
and holding button. Time can also be adjusted
by 10-minute intervals by pressing

button at

center interval.

6. Press the TIMER

button.

To CANCEL Press the “C” button.

Check if current time is set correctly.
If current time is not correct, timer will not operate at de-
sired time.

HIGH POWER MODE

When the HIGH POWER mode button is pressed, heated or
cooled air comes into the room at a higher fan speed for 15
minutes. The fan speed changes rhythmically between high
and ultra-high.

When the air conditioner(s) continue to run on HIGH
POWER mode in a large room, they may not reach the set
room temperature due to limited cooling capacity. This
may cause water drops to form around the outlet. In such
cases, please switch to MANUAL mode.

To CANCEL:

Press the HIGH POWER but-
ton once more. The operation
is set back to the previous
operation mode.

• If you operate the unit(s) at other than the above condi-

tions, a safety device may be activated and shut off the
power.

• On humid days, frost may form on the surface of air condi-

tioner or condensation may occur.

HIGH POWER MODE

Convenient on a hot day. (During AUTO, HEAT, COOL or DRY
mode)

Press the HIGH POWER button.

OPERATION CONDITION

• Operation Temperature Range:

TIMER MODE (ON, OFF)

• The timer can be set during any mode.
Select the timer setting by pressing:

!

CAUTION

!

HYUNDAI OPERATING RANGES

Indoor

Outdoor

Cool

70-90

70-109

<80%

Dry

59-90

59-109

<80%

Heat

59-81

32-75

<80%

Temperature (°F)

Indoor

Humidity

Mode

Advertising