Husqvarna 850 - Manual (Page 17)

English –
15
E
DRIVING
STOP START
STOP START
1
2
3
1
2
3
Cold engine:
4. Push the throttle control to position 3 (choke
position). In this position the engine receives a
richer mixture so that the engine starts more
easily.
7. When the engine has started release the igni-
tion key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
Warm engine:
5. Set the throttle control midway between position
1 and 2.
6. Turn the ignition key to start position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
!
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated areas.
The exhaust fumes contain toxic
carbon monoxide.
850,970 Eng 97-10-14, 14.29 15