Driving – Husqvarna 850 User Manual
Page 20
18
– English
E
DRIVING
STOP
START
MAX 15
°
Starting on slopes
1. Apply the parking brake.
2. Push the throttle control to 3/4 position to full
throttle position.
3. Push down the clutch and engage first gear.
4. Carefully release the clutch.
5. When the engine begins to drive, release the
parking brake.
Stopping the engine
Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
if it has been working hard.
1. Lift up the cutting unit by pulling the lever back to
the end position.
2. Pull back the throttle control and move the gear
shift to neutral (N).
Turn the ignition key to the STOP position.
WARNING!
Never drive the machine on ground
with a slope of more than 15°. Mow
slopes upwards and downwards,
never across. Avoid sudden changes
in direction.
!
850,970 Eng
97-10-14, 14.29
18