Technical data – Husqvarna 850 User Manual
Page 35
English –
33
E
Dimensions
Rider 850
Rider 970
Length
2000 mm
2145 mm
Width
960 mm
1050 mm (970-15.5), 1260 mm
(970-15.5S) 1120 (970-Bioclip)
Height
1060 mm
1060 mm
Unladen weight
225 kg
240 kg
Wheel base
820 mm
855 mm
Track
610 mm
Front 715 mm, rear 610 mm
Tyre size
16 x 6.50 x 8
16 x 6.50 x 8
Tyre pressure, front & rear
60 kPa (0.6 kp/cm
2
)
60 kPa (0.6 kp/cm
2
)
Max. gradient
15°
15°
Engine
Manufacture
Briggs & Stratton model 28B707
Briggs & Stratton model 28N707
type 0139, trim 01 (850-10.5)
type 0122, trim 01
Briggs & Stratton model 286707
type 0184, trim 01 (850-12.5)
Power
7.7/10.5 kW/h.p.(850-10.5)
11.4/15.5 kW/h.p.
9.2/12.5 kW/h.p. (850-12.5)
Displacement
362 cm
3
(850-10.5)
465 cm
3
465 cm
3
(850-12.5)
Fuel
Min. 92 octane leaded or unleaded
Min. 92 octane leaded or unleaded
USA & Canada
Min. 87 octane leaded or unleaded
Min. 87 octane leaded or unleaded
Tank volume
7 litres
7 litres
Oil
SAE 30 or SAE 10W-30 /API SF
SAE 30 or SAE 10W-30 /API SF
Oil volume
1.2 litres
1.2 litres
Start
Electric starter
Electric starter
Electrical system
Type
12 V, negative ground
12 V, negative grounded
Battery
12 V, 20 Ah
12 V, 20 Ah
Spark plug
Champion CJ8 or J8 (850-12.5)
Champion CJ8 or J8
electrode gap = 0.7–0.8 mm
electrode gap = 0.7–0.8 mm
Gearbox
Manufacture Europe
Peerless type MST 205-531A
Peerless type MST 205 531A
USA
Peerless type MST 205-530A
Peerless type MST 205 530A
Forward gears
5
5
Reverse gears
1
1
Speed forward
1.85–8.9 km/h
1.85–8.9 km/h
Speed reverse
2.5 km/h
2.5 km/h
Cutting unit
Type
3-blade unit with rear ejection
3-blade unit with side/rear ejection/Bioclip
Cutting width
850 mm
965 mm (970-15.5/15.5S), 1030 mm (Bioclip)
Cutting height
9 pos. 40–90 mm
9 pos. 40–90 mm, 45–80 mm (Bioclip)
Blade diameter
304 mm
350 mm (970-15.5/15.5S), 410 mm (Bioclip)
NOISE LEVEL
100 dB(A)
100 dB(A)
TECHNICAL DATA
We reserve the right to change technical specifications without prior notice.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.