Document Outline

• Contents
  • Introduction
    • Meridian DSP8000 loudspeaker system
    • Sample configurations
    • Specification
    • Available accessories
  • Setting up the DSP8000 loudspeakers
    • Unpacking
    • Positioning the DSP8000 loudspeakers
    • Connecting the loudspeakers
    • Connecting to other equipment
  • Using the DSP8000 loudspeakers
    • Selecting a source
    • Changing the display
    • Adjusting the volume
    • Changing the tilt, bass or phase
    • Changing the listening position
  • Configuring the DSP8000 loudspeakers
    • Choosing standard settings
    • Specifying information about your system
    • Configuring the sources
    • Configuring the setup options
  • Troubleshooting
    • Troubleshooting
    • Maintenance and cleaning
    • Service and guarantee
  • Index
• Index
  • A
    • absolute phase, changing
    • accessories
    • axis, changing
  • B
    • back panel
    • balance, changing
    • bass, changing
  • C
    • centre tilt offset, adjusting
    • cleaning
    • COMMS INPUT
    • COMMS OUTPUT
    • communications connections
    • components
    • configuration options
      • balance control
      • centre menus
      • communications mode
      • controller mode
      • diagnostic displays
      • position and master/slave
      • product address
      • system address
      • volume mode
    • configuring setup options
    • configuring sources
      • address
      • audio input
      • comms type
      • FIFO
      • label
    • configuring the loudspeakers
    • connecting the loudspeakers
    • connecting to other equipment
    • connections
      • COMMS INPUT
      • COMMS OUTPUT
      • communications
      • digital inputs
      • digital output
      • RS232
  • D
    • digital inputs
    • digital output
    • digital signal processing
    • dismantling the loudspeakers
    • display, changing
    • drive units
      • tightening
  • G
    • grilles, fitting and removing
    • guarantee
  • L
    • lacquer finish
      • polishing
    • listening position, changing
  • M
    • maintenance
    • master, selecting
    • Meridian comms
    • Meridian Digital Music System
    • Meridian Digital Theatre™
    • Meridian High Resolution (MHR)
    • muting the sound
  • P
    • positioning the loudspeakers
  • R
    • radio interference
  • S
    • safety warnings
    • sample configurations
      • Meridian Digital Music System
      • Meridian Digital Theatre™
    • selecting a source
    • service
    • settings, storing
    • Setup mode, selecting
    • setup options, configuring
    • slave, selecting
    • sources
      • configuring
      • selecting
    • speaker position, specifying
    • specification
    • standard settings, selecting
    • standby, switching to
    • status indicators
    • storing settings
    • switching to standby
  • T
    • Tightening the drive units
    • tilt, changing
    • troubleshooting
  • U
    • unpacking
  • V
    • volume
      • adjusting
      • muting