Fluke Ti20 - Manual (Page 21)

Getting Started
Inputs and Connections
1
1-13
Inputs and Connections
Connecting the USB Cable
The included USB cable can be used to either download or upload data from a PC to the
Imager. To connect the USB cable, insert the smaller USB connector into the Imager port
and the larger connector into the PC USB port as shown in Figure 1-9. Communications
begin automatically, and a USB symbol (I) appears in the header area of the Imager
display when communications are established.
THERMAL IMAGER
Ti 20
THERMAL
IMAGER
Ti 20
dag009f.eps
Figure 1-9. Connecting Using the USB Cable